Germany
TV-Server Version: 1.0.2.0
MediaPortal Version: 1.0.2.0
MediaPortal Skin: StreamedMP
Windows Version: Windows Vista 32bit
CPU Type: Intel Pentium Dual Core E4300
HDD: 4 TB Raid 5
Memory: 2 GB
Motherboard: Gigabyte P35C-DS3R
Video Card: Ati 2600 pro
Video Card Driver: 9.6
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card: Cablestar HD2
1. TV Card Type: DVB-C
1. TV Card Driver:
2. TV Card: MSI Digi Vox III
2. TV Card Type: DVB-T
2. TV Card Driver:
3. TV Card: Hauppauge bt848
3. TV Card Type: Cable Analog
3. TV Card Driver: Open Source Driver bt848
4. TV Card: Leadtek Winfast 2000
4. TV Card Type: Analog
4. TV Card Driver: Vista Drivers
MPEG2 Video Codec: Nvidia Pure Video
MPEG2 Audio Codec: FFd-Show
h.264 Video Codec: Core AVC 1.9.5 (CUDA rulez)
Satelite/CableTV Provider: Unitymedia
HTPC Case:
Cooling:
Power Supply:
Remote: cenero Master Din
TV: Samsung LE40F86BD
TV - HTPC Connection: VGA
This is my first Bugreport and i hope everything is correctly. sorry for bad english.
I have the following Problem with both of my Analog Cards.
1. First i tried the Winfast2000. By using the Winfast wizzard its no problem to watch TV.
Using the TV-Server:
First of all i selectet the country: Germany
Then i selectet the Type: cable
Now i ran the Scan for TV-channels.
After a short time everythimg seems to be scannt but no channels where found.
Now i did the next Scan but TV-server configuration crashed emedietly after pushing the Scan button. Windows tells the that the Programm isn't responsing.
Restart of the TV-Server konfiguration and scanning for channels, Tv-Server crashed by the first Scan.
After reinstalling drivers or the TV-Server the same behavior as under point 1
Now i got an Old Hauppauge Win/TV-Pci from a friend. but it changes nothing. the TV-Server crashes always after the first scan is completet until the TV-Server or the Hardware is been reinstalled.
I found a thread where ohter people have the same problem
Klick
If i did somethimg wrong, please help me so i can do it better
Greetz Schima
MediaPortal Version: 1.0.2.0
MediaPortal Skin: StreamedMP
Windows Version: Windows Vista 32bit
CPU Type: Intel Pentium Dual Core E4300
HDD: 4 TB Raid 5
Memory: 2 GB
Motherboard: Gigabyte P35C-DS3R
Video Card: Ati 2600 pro
Video Card Driver: 9.6
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card: Cablestar HD2
1. TV Card Type: DVB-C
1. TV Card Driver:
2. TV Card: MSI Digi Vox III
2. TV Card Type: DVB-T
2. TV Card Driver:
3. TV Card: Hauppauge bt848
3. TV Card Type: Cable Analog
3. TV Card Driver: Open Source Driver bt848
4. TV Card: Leadtek Winfast 2000
4. TV Card Type: Analog
4. TV Card Driver: Vista Drivers
MPEG2 Video Codec: Nvidia Pure Video
MPEG2 Audio Codec: FFd-Show
h.264 Video Codec: Core AVC 1.9.5 (CUDA rulez)
Satelite/CableTV Provider: Unitymedia
HTPC Case:
Cooling:
Power Supply:
Remote: cenero Master Din
TV: Samsung LE40F86BD
TV - HTPC Connection: VGA
This is my first Bugreport and i hope everything is correctly. sorry for bad english.
I have the following Problem with both of my Analog Cards.
1. First i tried the Winfast2000. By using the Winfast wizzard its no problem to watch TV.
Using the TV-Server:
First of all i selectet the country: Germany
Then i selectet the Type: cable
Now i ran the Scan for TV-channels.
After a short time everythimg seems to be scannt but no channels where found.
Now i did the next Scan but TV-server configuration crashed emedietly after pushing the Scan button. Windows tells the that the Programm isn't responsing.
Restart of the TV-Server konfiguration and scanning for channels, Tv-Server crashed by the first Scan.
After reinstalling drivers or the TV-Server the same behavior as under point 1
Now i got an Old Hauppauge Win/TV-Pci from a friend. but it changes nothing. the TV-Server crashes always after the first scan is completet until the TV-Server or the Hardware is been reinstalled.
I found a thread where ohter people have the same problem
Klick
If i did somethimg wrong, please help me so i can do it better
Greetz Schima
