Antec Fusion works? (2 Viewers)
- Thread starter eloxxd
- Start date
With fresh drivers from their website you can configure the VFD and the knob seperately. Therefore you can use the VFD in MP (disabled for Windows standard mode) and the knob for volumecontrol all the time.
Thank you
It was little hard to find it, since it seems on EU website the cases are not available in products menu, and once I selected EU as default zone, I was always redirected to that
So finally after tricking default redirecting due to cookie, I was able to find the download page under US website, and I post the link here for those interested
http://www.antec.com/us/support_faqDownload.html
Regards,
Bogdan
It was little hard to find it, since it seems on EU website the cases are not available in products menu, and once I selected EU as default zone, I was always redirected to that
So finally after tricking default redirecting due to cookie, I was able to find the download page under US website, and I post the link here for those interested
http://www.antec.com/us/support_faqDownload.html
Regards,
Bogdan
- September 18, 2006
- 848
- 53
- Home Country
-
Belgium
Thanks bzamfir & G.B. Wolf for this useful piece of information.
How do you guys have your VFD configured?
I like the information you get when the external display plugin is activated but then the system freezes when it has to hibernate or doesn't boot for recording.
The driver didn't change, it's just the VFD application which seems to be different.
How do you guys have your VFD configured?
I like the information you get when the external display plugin is activated but then the system freezes when it has to hibernate or doesn't boot for recording.
The driver didn't change, it's just the VFD application which seems to be different.
- November 1, 2006
- 12
- 0
- 44
- Home Country
-
Germany
Hi there.
i've installed this drivers, but the volume knob doesnt work. Is there something else i have to configure? Perhaps something in this vfd-software from antec?
In Windows standard mode the knob doesnt work either.
i've installed this drivers, but the volume knob doesnt work. Is there something else i have to configure? Perhaps something in this vfd-software from antec?
In Windows standard mode the knob doesnt work either.
- November 1, 2006
- 12
- 0
- 44
- Home Country
-
Germany
You managed the volume knob or only the vfd display?
Users who are viewing this thread
Similar threads
Hi there,
since I changed TV and HTPC's CPU, I'm wondering if this guide:
Guide
could be considered still good today, since it's been almost 13 years since then and it's still referring to a resolution of 1080p?
I say this because I have a new Panasonic 4K HDR TV, and with that settings, even if I have an old Gygabyte GPU (bought...
Hi there,
since I changed TV and HTPC's CPU, I'm wondering if this guide:
Guide
could be considered still good today, since it's...
Hi there,
since I changed TV and HTPC's CPU, I'm wondering if this guide:
Guide
could be considered still good today, since it's...
Hello,
I would like to use a media server to display various learning categories. I prefer not to use software like Kodi, as it requires extensive metadata scraping that I don't need.
Is it possible to instantly access the video categories when landing on the page? I would like to display a single media page with the following...
Hello,
I would like to use a media server to display various learning categories. I prefer not to use software like Kodi, as it...
Hello,
I would like to use a media server to display various learning categories. I prefer not to use software like Kodi, as it...
Brief update... Hauppauge support responded quickly, stating that the "driver for all of our product confirm to the BDA format". Not sure what that means, but to test that, I downloaded a copy of Capture4Me, and indeed, it switches LNBs without any issues with minimal configuration (just set DiSEqC to 1.x A/B/C/D and select the...
Brief update... Hauppauge support responded quickly, stating that the "driver for all of our product confirm to the BDA format"...
Due to ongoing issues with my TBS5520SE USB tuner, I've invested in a Hauppauge WinTV-NOVA-S2 tuner. I have a multi-LNB setup...
Before you create this bug report:
Make sure that your system (Windows, codecs and drivers) is up to date, matching the Requirements and you've filled in your System Specs.
Have a look at our MediaPortal Wiki! Maybe the solution is already there.
Have a look at our Jira (Bug and Issue Tracker)and the threads in this section, maybe...
Before you create this bug report:
Make sure that your system (Windows, codecs and drivers) is up to date, matching the...
Before you create this bug report:
Make sure that your system (Windows, codecs and drivers) is up to date, matching the...
Ran into this problem following an otherwise sucessful upgrade from MP 1.34 x64 to MP 1.35 x64 the CEC Remote plugin which I use just to control volume and standby, will no longer put my devices (TV & AVR) to sleep when the HTPC is put in standby. Also when I wake up the HTPC MP closes or crashes (not sure which) as per the example in...
Ran into this problem following an otherwise sucessful upgrade from MP 1.34 x64 to MP 1.35 x64 the CEC Remote plugin which I use...
Ran into this problem following an otherwise sucessful upgrade from MP 1.34 x64 to MP 1.35 x64 the CEC Remote plugin which I use...