anysee E30Plus (1 Viewer)

D

DoctorBob

New Member
February 1, 2007
4
0
It is working without the descramble function, so only free to air can be viewed, but then in a beter quality as the Anysee software it self.

MP is not supporting the descramble function of this unit! it is a software layer that must be connected somehow, don't me ask how ;) its a AMT module that I know, maybe some of the super guys here could figure this out :)
 

Users who are viewing this thread

Online now: 2 (members: 0, guests: 2)

Similar threads

struppi21
MP1 MP2 [solved] Deleting recordings is sometimes not possible DE
I was just tinkering with a few settings in the MediaPortal configuration and am happy to have found the cause of the problem. Disabling the option "Single seat setup: force RTSP usage" under "TV/Radio", "Advanced Options" resolved the issue. After I disabled this option, I was able to delete the recordings the first time...
I was just tinkering with a few settings in the MediaPortal configuration and am happy to have found the cause of the problem...
Deleting recordings sometimes doesn't work. Neither the 0 button nor the Info/Delete button works. Nothing happens at all with...
Replies
6
Views
334
struppi21
struppi21
Andy_2639
MP1 MP2 1.38 Running TVService as "NT Service\TVService" or "Local Service" not working anymore since Windows September 2025 updates DE
Reading through your code, I can see it's more than a couple steps above my paygrade. :cry:
Reading through your code, I can see it's more than a couple steps above my paygrade. :cry:
I used to run the TVService under the "NT Service\TVService" account to follow least privileges principal (not exposing my whole...
Replies
3
Views
2K
2BitSculptor
2BitSculptor
G
MP1 MP2 Scanning & Mapping channels DE
I note that you are using MP2. The following applies to MP1, but I think that MP2 is identical in this situation. "TV Server Config" has a "TV Mapping" panel in the "TV Channels" section. On the "TV Mapping" tab: The left column lists the channels that have not yet been mapped to the TV tuner identified by the drop-down menu just...
I note that you are using MP2. The following applies to MP1, but I think that MP2 is identical in this situation. "TV Server...
I've scanned for channels, and got all channels mapped to tuner 0 of my 8 channel TV card (eg: 2 cards of 4 channels each) Is there...
Replies
1
Views
728
CyberSimian
CyberSimian
L
MP1 MP2 Looking for Win7 64 - AverMedia A323AF card installation software DE
See my reply in the other thread. -- from CyberSimian in the UK
See my reply in the other thread. -- from CyberSimian in the UK
Any idea where can I get the Windows7 installation software for this AverMedia A323AF card. I found the drivers for the A323 which...
Replies
1
Views
1K
CyberSimian
CyberSimian
B
MP1 MP2 An installation report - older hardware and why I used 1.33 not 1.38 DE
4.5 is really old. I'm not sure 4.5.5 even is a version that actually existed. You should be able to install .NET Framework 4.8.0 on Windows 7 SP1
4.5 is really old. I'm not sure 4.5.5 even is a version that actually existed. You should be able to install .NET Framework 4.8.0...
My TV PC is more a cast-off on older hardware (a 'Quiet PC' i5 4690, 16GB ram, 2xSSD 1xHDD, system graphics), mainly as a cheap way...
Replies
5
Views
1K
el Filou
el Filou

About The Project

The vision of the MediaPortal project is to create a free open source media centre application, which supports all advanced media centre functions, and is accessible to all Windows users.

In reaching this goal we are working every day to make sure our software is one of the best.

         

Quick Navigation

Support MediaPortal!

The team works very hard to make sure the community is running the best HTPC-software. We give away MediaPortal for free but hosting and software is not for us.

Care to support our work with a few bucks? We'd really appreciate it!

Community platform by XenForo® © 2010-2021 XenForo Ltd.
Top Bottom