ASUS MyCinema 7131 Dual - NOT WORKING (1 Viewer)

[Pawwlik]

Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4$CVS-31.05.2006- 0:57:57,44
(2006-05-31)
MediaPortal Skin: MCE
Windows Version: Windows XP (SP1)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: Cyberlink Audio Decoder
Video Codec: Cyberlink Video/SP Decoder
CPU Type: Intel Celeron - 2.26GHz
Memory: 1 GB
Motherboard: P4-865PE Series/VL13PE (First International Computer, Inc.)
TV Card Model: ASUS MyCinema P7131 DUAL (rev_d0)
TV Card Type: DVB
TV Card Driver: v.13.3.1.4 : (Based on Philips driver v1.3.3.1)
Video Card Model: Nvidia Geforce 6200 (256 MB)
Video Card Driver: 81.98 forceware
Video Card Resolution: 800x600
Video Render Type: Overlay
Audio Card Model: Realtek AC'97 Audio
Audio Card Driver: 5.10.0.5100
Synopsis::

I have installed the TV card and the latest card driver from ASUS www. I haven't installed Cyberlink PowerCinema also supplied with the card.

ERROR:"Cannot create graph" in MP setup and MP for both - analog and dvb receiver. Revisions match - rev_d0

When I try to create graph with GraphEdit, I cannot connect PIN from Microsoft DVBT Network Provider to 713x BDA DVBT Tuner - it says:These filters cannot agree on a connection.Verify....blabla

I tried to modify the CaptureCardDefinitions.xml (analog part) according to posts in this forum, but without success. Still "cannot create graph".

I don't have the original Cyberlink PowerCinema to check if the card works at all, maybe it's deffective? Is there any other software to test if this card works? I wanted to download PowerCinema first, but they say, that the demo version does not have tuner support.

It seems to me that the Philips IC on the card is quite hot :evil: Can someone with this card "measure with a finger" the Philips IC temp on working card? It is so hot that I can leave the finger on it for max 2 seconds :evil:.

Where could be the mistake?Please help.

error part of the log:

20.6.2006 16:27:14 DVBGraphBDA: Adding configured filters...
20.6.2006 16:27:14 DVBGraphBDA: Adding filter <Microsoft DVBT Network Provider> with moniker <@device:sw:{71985F4B-1CA1-11D3-9CC8-00C04F7971E0}\Microsoft DVBT Network Provider>
20.6.2006 16:27:14 DVBGraphBDA: Added filter <Microsoft DVBT Network Provider> with moniker <@device:sw:{71985F4B-1CA1-11D3-9CC8-00C04F7971E0}\Microsoft DVBT Network Provider>
20.6.2006 16:27:14 DVBGraphBDA: Adding filter <713x BDA DVBT Tuner> with moniker <@devicenp:\\?\pci#ven_1131&dev_7133&subsys_48621043&rev_d0#4&1f7dbc9f&0&28f0#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{3ff44ee5-8547-402a-94f3-d447f4d7c400}>
20.6.2006 16:27:14 DVBGraphBDA: Added filter <713x BDA DVBT Tuner> with moniker <@devicenp:\\?\pci#ven_1131&dev_7133&subsys_48621043&rev_d0#4&1f7dbc9f&0&28f0#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{3ff44ee5-8547-402a-94f3-d447f4d7c400}>
20.6.2006 16:27:14 DVBGraphBDA: Adding filter <713x BDA Digital Capture> with moniker <@devicenp:\\?\pci#ven_1131&dev_7133&subsys_48621043&rev_d0#4&1f7dbc9f&0&28f0#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\{5bb3dbd0-9e1e-424c-9281-6b5e7109f100}>
20.6.2006 16:27:14 DVBGraphBDA: Added filter <713x BDA Digital Capture> with moniker <@devicenp:\\?\pci#ven_1131&dev_7133&subsys_48621043&rev_d0#4&1f7dbc9f&0&28f0#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\{5bb3dbd0-9e1e-424c-9281-6b5e7109f100}>
20.6.2006 16:27:14 DVBGraphBDA: Adding configured filters...DONE
20.6.2006 16:27:14 DVBGraphBDA: Adding configured pin connections...
20.6.2006 16:27:14 DVBGraphBDA: Connecting <Microsoft DVBT Network Provider>:0 with <713x BDA DVBT Tuner>:0
20.6.2006 16:27:14 DVBGraphBDA: Found sourcePin: <0> <System.__ComObject>
20.6.2006 16:27:14 DVBGraphBDA: Found sinkPin: <0> <System.__ComObject>
20.6.2006 16:27:14 DVBGraphBDA: Pins connected...
20.6.2006 16:27:14 DVBGraphBDA: Connecting <713x BDA DVBT Tuner>:0 with <713x BDA Digital Capture>:0
20.6.2006 16:27:14 DVBGraphBDA: Found sourcePin: <0> <System.__ComObject>
20.6.2006 16:27:14 DVBGraphBDA: Found sinkPin: <0> <System.__ComObject>
20.6.2006 16:27:14 DVBGraphBDA: Pins connected...
20.6.2006 16:27:14 PlugInManager.Start()
20.6.2006 16:27:14 Exception ystem.InvalidCastException: Unable to cast COM object of type 'StreamBufferSink' to interface type 'DirectShowLib.SBE.IStreamBufferSink3'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{974723F2-887A-4452-9366-2CFF3057BC8F}' failed due to the following error: Unknown interface (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
at MediaPortal.TV.Recording.DVBGraphBDA.CreateGraph(Int32 Quality)
20.6.2006 16:27:14 Exception :Unable to cast COM object of type 'StreamBufferSink' to interface type 'DirectShowLib.SBE.IStreamBufferSink3'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{974723F2-887A-4452-9366-2CFF3057BC8F}' failed due to the following error: Unknown interface (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
20.6.2006 16:27:14 site :Boolean CreateGraph(Int32)
20.6.2006 16:27:14 source :TVCapture
20.6.2006 16:27:14 stacktrace: at MediaPortal.TV.Recording.DVBGraphBDA.CreateGraph(Int32 Quality)
20.6.2006 16:27:14 Commandprocessor:running

 

[Pawwlik]

Well at least the analogue part works.

I have installed the Cyberlink Encoder, which was missing. Then it stopped to report "Unable to create graph".

I am able to autotune stations, but do not see the picture/sound. When I start MP, no error is reported, but the video box is black,no sound is heard.TV On switch is off and I'm unable to switch it on.

I have tested the analogue part in Virtual Dub Capture, and there the TV picture is OK, so the card should be OK.

here is the setup I use:
<capturecard commercialname="Asus My Cinema-P7131 Dual (Analogue)" capturename="713x BDA Analog Capture" devid="ven_1131&amp;dev_7133&amp;subsys_48621043&amp;rev_d0">
<capabilities tv="true" radio="true" mpeg2="true" mce="true" sw="false" bda="false"/>
<tv>
<interface cat="mux" video="" audio="" mpeg2="0"/>
<filters>
<filter cat="tvtuner" name="713x BDA Analog Tv Tuner" checkdevice="true"/>
<filter cat="tvaudio" name="713x BDA Analog TV Audio" checkdevice="true"/>
<filter cat="crossbar" name="713x BDA Analog Xbar" checkdevice="true"/>
<filter cat="capture" name="713x BDA Analog Capture" checkdevice="true"/>
<filter cat="videncoder" name="Cyberlink MPEG Video Encoder" checkdevice="false"/>
<filter cat="audencoder" name="Cyberlink Audio Encoder" checkdevice="false"/>
<filter cat="mux" name="Cyberlink MPEG Muxer" checkdevice="false"/>
</filters>
<connections>
<connection sourcefilter="tvtuner" sourcepin="0" sinkfilter="crossbar" sinkpin="0"/>
<connection sourcefilter="tvtuner" sourcepin="1" sinkfilter="tvaudio" sinkpin="0"/>
<connection sourcefilter="tvaudio" sourcepin="0" sinkfilter="crossbar" sinkpin="3"/>
<connection sourcefilter="crossbar" sourcepin="0" sinkfilter="capture" sinkpin="0"/>
<connection sourcefilter="crossbar" sourcepin="1" sinkfilter="capture" sinkpin="1"/>
<connection sourcefilter="capture" sourcepin="0" sinkfilter="videncoder" sinkpin="0"/>
<connection sourcefilter="capture" sourcepin="2" sinkfilter="audencoder" sinkpin="0"/>
<connection sourcefilter="videncoder" sourcepin="0" sinkfilter="mux" sinkpin="0"/>
<connection sourcefilter="audencoder" sourcepin="0" sinkfilter="mux" sinkpin="1"/>
</connections>
</tv>
</capturecard>


In MP log I see this:
20.6.2006 19:10:46 crossbar routing done
20.6.2006 19:10:46 mpeg2:add Videoanalyzer
20.6.2006 19:10:46 mpeg2:add streambuffersink
20.6.2006 19:10:46 mpeg2tartTimeshifting(D:\card1\live.tv)
20.6.2006 19:10:46 mpeg2:render graph
20.6.2006 19:10:46 mpeg2:render to :\card1\live.tv
20.6.2006 19:10:46 mpeg2:connect demux video out->analyzer in
20.6.2006 19:10:46 mpeg2:demux video out connected to analyzer
20.6.2006 19:10:46 mpeg2:analyzer out->stream buffer
20.6.2006 19:10:46 mpeg2:connected to streambuffer
20.6.2006 19:10:46 mpeg2:demux mpeg audio out->stream buffer
20.6.2006 19:10:46 mpeg2:mpeg audio out connected to streambuffer
20.6.2006 19:10:46 mpeg2:FAILED to get IStreamBufferSink interface

Any ideas to get it running?

 

[ammm]

I've got the asus dual too, and I use only the dvb-t part and is working fine with latest svn (a couple of days ago).
I'm not sure but I think I have the rev d0 too, whit silver remote.

The only problem I have is in configuration, if I want to modify something about the card I have to remove it, readd it, and rescan channels or reassign channels to tuner.

This is my config:

Area: Media Portal Program
MP Version: 0.2.0 RC4 + svn 18/6
Skin: ProjectX
Windows Version: Windows XP Pro SP2 (.net 2.0)
CPU Type: PIV 3GHz
Memory: 1x 512MB DDR
Motherboard Chipset: VIA PT800+ 8237 (ASRock P4VT8+)
Video Card: ATI 9200SE
Video Card Driver: Catalyst 6.5
Video Card Resolution: 720x576
Video Render Type: VMR9 Renderless
Video Codec Type & Version: Mpeg2dec
Audio Codec Type & Version: MPEG/AC3....
TV Card: Technisat SkyStar2 (SS2) 2.6c
TV Card Type: DVB-S
TV Card Driver: 4.3.2
TV Card2: ASUS MyCinema 7131Dual
TV Card2 Type: DVB-T
TV Card2 Driver: latest

 

[Pawwlik]

I reinstalled back the MP 0.1.3.0 yesterday, and the Analogue part started to work. I'm able to tune in setup, view and record in MP. Didn't tested DVB part yet.

I read in some thread here, that the problem with StreamBufferSink appeared in MP since 0.2 RC2.

DMAN posted a suggestion to install SP2 on SP1 XP's , that it should solve the problem, but since then, there is no reply in the thread, if it was the cause, or not. So it seems, that it's only a WINXP SP1 problem - some outdated dll's probably.

I didn't wanted to install it, because SP2 has bigger memory and cpu requirements and the machine gets slooooooower, but it seems, that or I will have to stay with 0.1.3.0 or install it :?

 

[ammm]

uhm rc2 has great improvements and more stability!
sp2 if you disable firewall, autoupdate and so on uses almost the same memory in my opninion....
bye amm

 

[guyss]

Asus MyCinema dual no sound and remote all over the place

I couldn't get PowerCinema to scan all the digital channels here in Melbourne australia.
So I installed MediaPortal and got all the channels working v ery well but the remote only works on the up down and sideways buttons and the enter button.

There is no sound either. Picture is great and the dvd player works well too.

I think it is a great program and I am looking forward to ironing out the last few issues.

Can anyone help me please with the remote settings and what I may have wrong in regard to the sound?

thanks
Guy

 

[ammm]

Re: Asus MyCinema dual no sound and remote all over the plac

I couldn't get PowerCinema to scan all the digital channels here in Melbourne australia.
So I installed MediaPortal and got all the channels working v ery well but the remote only works on the up down and sideways buttons and the enter button.

There is no sound either. Picture is great and the dvd player works well too.

I think it is a great program and I am looking forward to ironing out the last few issues.

Can anyone help me please with the remote settings and what I may have wrong in regard to the sound?

thanks
Guy

I use AutoHotKey to remap keys, take a look at this thread
https://forum.team-mediaportal.com/...0&postorder=asc&highlight=autohotkey&start=30
bye

 

[guyss]

Thanks Amm
Do you have the ahk file to suit the MyCinema dual?
If so could you email it to me?
thanks again
Guy