United States of America
TV-Server Version: TVE3 Latest SVN
MediaPortal Version: Latest SVN
MediaPortal Skin:
Windows Version: Windows XP SP2
CPU Type: AMD Athlon 64 X2 3800+
HDD: Seagate Barracuda 7200.9 160GB
Memory: Crucial Ballistix PC 3200 (2x512)
Motherboard: Sapphire Pure Innovation PI-A9RX480
Motherboard Chipset:
Motherboard Bios:
Video Card: Powercolor Radeon X1950 Pro
Video Card Driver:
Sound Card: Onboard Realtek ALC880
Sound Card AC3:
Sound Card Driver:
1. TV Card: Powercolor Theatre 550 Pro PCI-e
1. TV Card Type: Analog
1. TV Card Driver:
2. TV Card: VBOX Cat's Eye DTA-150
2. TV Card Type: ATSC
2. TV Card Driver: 2.1.705.7
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: NVIDIA PureVideo
MPEG2 Audio Codec: MPA
Satelite/CableTV Provider:
HTPC Case:
Cooling: Scythe Ninja and 2 Nexus 120mm fans
Power Supply: Antec NeoHE 430
Remote: Snapstream Firefly
TV: Sceptre X20g Naga3
TV - HTPC Connection: DVI
When I scan for channels, a lot of the ones I should be getting (I got them before updating to all the latest and greatest) are not showing up. The TV Server scans properly, but where it should find channels it reports "Nothing Found." On the frequencies where there should not be anything, it reports "No Signal," so I know it is finding something on the "Nothing Found" channels. I've double checked all the drivers, tried it with TVE2 (which works), tested my analog card (which also works), and reinstalled a few times. I searched the forums and mantis but haven't seen anything that quite fit this description.
I attached a screenshot and the tv.log. If there is anything else you need, just let me know. Thanks for helping (and double thanks for developing).
MediaPortal Version: Latest SVN
MediaPortal Skin:
Windows Version: Windows XP SP2
CPU Type: AMD Athlon 64 X2 3800+
HDD: Seagate Barracuda 7200.9 160GB
Memory: Crucial Ballistix PC 3200 (2x512)
Motherboard: Sapphire Pure Innovation PI-A9RX480
Motherboard Chipset:
Motherboard Bios:
Video Card: Powercolor Radeon X1950 Pro
Video Card Driver:
Sound Card: Onboard Realtek ALC880
Sound Card AC3:
Sound Card Driver:
1. TV Card: Powercolor Theatre 550 Pro PCI-e
1. TV Card Type: Analog
1. TV Card Driver:
2. TV Card: VBOX Cat's Eye DTA-150
2. TV Card Type: ATSC
2. TV Card Driver: 2.1.705.7
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: NVIDIA PureVideo
MPEG2 Audio Codec: MPA
Satelite/CableTV Provider:
HTPC Case:
Cooling: Scythe Ninja and 2 Nexus 120mm fans
Power Supply: Antec NeoHE 430
Remote: Snapstream Firefly
TV: Sceptre X20g Naga3
TV - HTPC Connection: DVI
When I scan for channels, a lot of the ones I should be getting (I got them before updating to all the latest and greatest) are not showing up. The TV Server scans properly, but where it should find channels it reports "Nothing Found." On the frequencies where there should not be anything, it reports "No Signal," so I know it is finding something on the "Nothing Found" channels. I've double checked all the drivers, tried it with TVE2 (which works), tested my analog card (which also works), and reinstalled a few times. I searched the forums and mantis but haven't seen anything that quite fit this description.
I attached a screenshot and the tv.log. If there is anything else you need, just let me know. Thanks for helping (and double thanks for developing).
