United States of America
TV-Server Version:
MediaPortal Version: 2.3.0
MediaPortal Skin: BlueTwo
Windows Version: XP Pro SP 2
CPU Type: AMD Athlon 64 X2 4600+
HDD: Seagate 300GB ATA
Memory: CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800
Motherboard: ASUS M2NPV-VM
Motherboard Chipset: NVIDIA GeForce 6150, nForce 430
Motherboard Bios:
Video Card: NVIDIA GeForce 6150 (on board)
Video Card Driver: 8.2.0.5
Sound Card: SoundMAX Integrated Digital HD Audio (on board)
Sound Card AC3: coaxial out
Sound Card Driver: 5.10.1.4151
1. TV Card: Hauppage 150
1. TV Card Type: analog
1. TV Card Driver:
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: nVidia PureVideo
MPEG2 Audio Codec: nVideo PureVideo
Satelite/CableTV Provider: Dish Network
HTPC Case: nMedia 280BAV
Cooling:
Power Supply:
Remote: Hauppauge 45 key
TV:
TV - HTPC Connection: S-Video
I am currently using VMR9 rather than EVR.
Alright, after all these weird issues, I finally decided that it was just messed up with all the installs/uninstalls. So I formatted and re-installed everything clean. And my problems are all back. I have searched the forums, but can't find another case of this. I have tried using Graph Edit for a hint, but it looks OK from what I can tell. I am not all that good at interpreting them, though.
Problem 1: WMV files have audio but no video in MP. Playing in Windows Media Player 11 is fine, but in MP I get no picture. If I switch to use EVR in MP Config instead of VMR, then it works in MP. Log file is attached. WMVMediaPortalLog.zip.
Problem 2: If I switch to EVR, my WMVs get both video and audio, but every time I try to skip forward in a Daemon-mounted ISO, MP freezes up and I have to CTRL-ALT-DEL to get out. This is log file EVRMediaPortalLog.zip.
Problem 3: MPEG-2 DVD rips (I have only 1, since Kung Fu Hustle refused to rip as an ISO like everything else, it's an MPEG-2 rip) have video but no audio. Again, they play fine in WMP11, but not in MP. Log file is NOT attached, as this is the lesser of my worries. MPGMediaPortalLog.zip. (Don't worry too hard about this problem unless it sounds familiar - I will likely just re-encode to something I can use.)
I have spent many hours installed, re-installing, trying various codecs, researching the forums, but just can't find a solution. Any help would be appreciated.
Thanks-
Milhouse
MediaPortal Version: 2.3.0
MediaPortal Skin: BlueTwo
Windows Version: XP Pro SP 2
CPU Type: AMD Athlon 64 X2 4600+
HDD: Seagate 300GB ATA
Memory: CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800
Motherboard: ASUS M2NPV-VM
Motherboard Chipset: NVIDIA GeForce 6150, nForce 430
Motherboard Bios:
Video Card: NVIDIA GeForce 6150 (on board)
Video Card Driver: 8.2.0.5
Sound Card: SoundMAX Integrated Digital HD Audio (on board)
Sound Card AC3: coaxial out
Sound Card Driver: 5.10.1.4151
1. TV Card: Hauppage 150
1. TV Card Type: analog
1. TV Card Driver:
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: nVidia PureVideo
MPEG2 Audio Codec: nVideo PureVideo
Satelite/CableTV Provider: Dish Network
HTPC Case: nMedia 280BAV
Cooling:
Power Supply:
Remote: Hauppauge 45 key
TV:
TV - HTPC Connection: S-Video
I am currently using VMR9 rather than EVR.
Alright, after all these weird issues, I finally decided that it was just messed up with all the installs/uninstalls. So I formatted and re-installed everything clean. And my problems are all back. I have searched the forums, but can't find another case of this. I have tried using Graph Edit for a hint, but it looks OK from what I can tell. I am not all that good at interpreting them, though.
Problem 1: WMV files have audio but no video in MP. Playing in Windows Media Player 11 is fine, but in MP I get no picture. If I switch to use EVR in MP Config instead of VMR, then it works in MP. Log file is attached. WMVMediaPortalLog.zip.
Problem 2: If I switch to EVR, my WMVs get both video and audio, but every time I try to skip forward in a Daemon-mounted ISO, MP freezes up and I have to CTRL-ALT-DEL to get out. This is log file EVRMediaPortalLog.zip.
Problem 3: MPEG-2 DVD rips (I have only 1, since Kung Fu Hustle refused to rip as an ISO like everything else, it's an MPEG-2 rip) have video but no audio. Again, they play fine in WMP11, but not in MP. Log file is NOT attached, as this is the lesser of my worries. MPGMediaPortalLog.zip. (Don't worry too hard about this problem unless it sounds familiar - I will likely just re-encode to something I can use.)
I have spent many hours installed, re-installing, trying various codecs, researching the forums, but just can't find a solution. Any help would be appreciated.
Thanks-
Milhouse