Reply to thread

Message

<blockquote data-quote="SwissBuster" data-source="post: 364504" data-attributes="member: 78168">1. Noted for Duplicate channels. 2. I'm using a technisat mantis sat card (DVB-S) which is connected to a technisat multitynne (4 LNB sat dish). This allows me to receive signals from 4 different satelites. The CAM is loaded with a smartcard to receive encrypted Swiss channels. 3. CAM settings that are not imported are found in TV server config. Click TV servers &gt; (PC name). Select your card under the 'Cards' tab (right hand side of window) and hit edit. The field 'CAM enabled and present for this card' was not activated.4. The LNB settings that were missed are also in TV server config. Click TV servers &gt; (PC name) &gt; (Card name) on the left-hand menu. The first tab (RHS) is called 'LNB Setup' (others are 'DiSEqC Motor' and 'Scanning'). Here I have the option to activate and select 4 satelites for each of my 4 LNBs. After running BackupSettings these 4 selections are lost. There are other options on this tab but I don't use then. I don't have a DiSEqC motor so haven't used these options either. Any questions, fire away!</blockquote>

[QUOTE="SwissBuster, post: 364504, member: 78168"] 1. Noted for Duplicate channels. 2. I'm using a technisat mantis sat card (DVB-S) which is connected to a technisat multitynne (4 LNB sat dish). This allows me to receive signals from 4 different satelites. The CAM is loaded with a smartcard to receive encrypted Swiss channels. 3. CAM settings that are not imported are found in TV server config. Click TV servers > (PC name). Select your card under the 'Cards' tab (right hand side of window) and hit edit. The field 'CAM enabled and present for this card' was not activated. 4. The LNB settings that were missed are also in TV server config. Click TV servers > (PC name) > (Card name) on the left-hand menu. The first tab (RHS) is called 'LNB Setup' (others are 'DiSEqC Motor' and 'Scanning'). Here I have the option to activate and select 4 satelites for each of my 4 LNBs. After running BackupSettings these 4 selections are lost. There are other options on this tab but I don't use then. I don't have a DiSEqC motor so haven't used these options either. Any questions, fire away! [/QUOTE]

Verification