Can't seem to get EPG to work (1 Viewer)

[Nicoolai]

MediaPortal Version: 1.1.2.0
MediaPortal Skin: Blue3
Windows Version: Win7 ultimate x64
CPU Type: C2D

Everything is out-of-the-box, when it comes to mediaportal.
I have scanned all my ip-tv channels, but i am unable to get the EPG on any of them.
I tried going into manual control, but it never scans further than the 1st channel, where it seems to stall.
I saw someone mention incorrect transportID in another thread, but i have no idea what it should be set to?
After scanning the channels, they all seem to have 1 in TransportID.

How do i get EPG to work? It is there if i go through the set-top box i recieved with my IP-TV.

 

[te3hpurp]

Logs ?

 

[Nicoolai]

This is from my log.
I have attached the rest of the log file.

2011-02-09 11:53:08.195200 [(18)]: EPG: grabber initialized for 1 transponders..
2011-02-09 11:53:09.224800 [DVB EPG timer(17)]: Grab for card:#1 transponder #1/1 channel: Eurosport
2011-02-09 11:53:09.224800 [DVB EPG timer(17)]: EpgCard: grab epg on card: #1 transponder: #0 ch:Eurosport
2011-02-09 11:53:09.942400 [DVB EPG timer(17)]: EpgGrabbing: Start
2011-02-09 11:53:09.958000 [DVB EPG timer(17)]: EpgCard: card: 1 starting to grab DVBIP:tv:Telenor Eurosport Freq:0 ONID:1 TSID:1 SID:905 PMT:0x102 FTA:False LCN:10000 Url:udp://@233.139.53.70:5501
2011-02-09 11:53:39.988000 [(5)]: EpgCard: allow grabbing for 30,03 seconds on card 1
2011-02-09 11:54:10.361200 [(5)]: EpgCard: allow grabbing for 60,4032 seconds on card 1
2011-02-09 11:54:40.219600 [(5)]: EpgCard: allow grabbing for 90,2616 seconds on card 1
2011-02-09 16:04:01.809800 [(18)]: EPG: grabber stopped..
2011-02-09 16:04:01.809800 [(18)]: EpgCard: card: 1 stop grabbing
2011-02-09 16:04:01.809800 [(18)]: EpgGrabbing: Stop - user epg

 

[te3hpurp]

Hi.

Im sorry but we need all logs. And have you tried to grab epg only from vision norge channell(if its available) or any another non-encrypted

br,

 

[Nicoolai]

No problem, these are all my logs, since i started playing with it.
All my channels are un-encrypted.

 

[te3hpurp]

Are you able to watch them?. Cos in error.log there is a lot of errors for epg grabber to tune. You could also try epg grabbing in a way that enable allow epg grabbing while timeshifting and watch channel for at least 10 min.

I dont know your provider(where stream comes from). Does it even send epg data?, does regular stb grab epg from stream or from net.
Br,

 

[Nicoolai]

I can watch all the channels in media portal. No problems.
When using my IP-TV box (and my television) there is EPG, i just don't know where it comes from.

You could also try epg grabbing in a way that enable allow epg grabbing while timeshifting and watch channel for at least 10 min.

I'm not sure what you mean?
I am totally new to this. I just wanted to try out mediaportal, and see if i could get TV to work, before i put together a htpc.

 

[te3hpurp]

Hi.

In start menu there is tool same which you have used to setup channells, use that and find epg in left pane. There are lot of options to try for epg grabbing. Setting i mentioned is there too.

Also try different channels that is used for grasbing epg. You can change it there too. Also remember to check correct lang for epg grabbing.

Br,

 

[Nicoolai]

I'm not sure i understand.
I used the tvserver configuration tool, to setup channels.

First, i made a m3u file, with all the ip's, and then i scanned the channels, from that m3u.
Since no EPG appeared, i then went to manual control, and it started grabbing, except it got stuck on the first channel.

 

[te3hpurp]

Okay.

Stupid me :-(

So you dont have those settings available like in images.

Then you should set up WebEpg if it is possible.

WebEPG - MediaPortal Wiki

Br,