Reply to thread

Message

<blockquote data-quote="Pucco" data-source="post: 1063736" data-attributes="member: 20358">The log from post #253 is with settings from post #252 as shown in appended image.On the AVR input is set to BD-input (HDMI) and output to the TV is HDMIout-1HDMI-Control is set to ON.Standby Through is set to BD-inputThe TV input is set to INPUT-4 (HDMI-1)Aquos-Link (Sharp-CEC) is enabled for HDMI-1Aquos-Link is set to power on/off the AVR together with the TV. Allways works, even when connection with the HTPC is lost.Aquos-Link is set to controll audio volume in the AVR. Allways works, even when connection with the HTPC is lost.I changed the input on the AVR from BD to HDMI-1 and got the following log entry that differs from the previous log.RoutinChange Parameters: 100110 for BD and 100120 for HDMI-1SetStreamPath Parameters: 110 for BD and 120 for HDMI-1There is no change in behaviour. The TV still thinks it is in local mode (except for power commands and audio volume).Switch to VIDEO-1 input on AVR[2014-02-15 08:37:18,781] [Log&nbsp; ] [38&nbsp; ] [DEBUG] - CecRemote: Command: VendorCommandWithId Parameters: 0E036D5[2014-02-15 08:37:18,950] [Log&nbsp; ] [38&nbsp; ] [DEBUG] - CecRemote: Command: VendorCommandWithId Parameters: 0E036D8Switch to HDMI-1 input on AVR[2014-02-15 08:37:33,646] [Log&nbsp; ] [38&nbsp; ] [DEBUG] - CecRemote: Command: VendorCommandWithId Parameters: 0E036D5[2014-02-15 08:37:33,816] [Log&nbsp; ] [38&nbsp; ] [DEBUG] - CecRemote: Command: VendorCommandWithId Parameters: 0E036D8[2014-02-15 08:37:34,909] [Log&nbsp; ] [38&nbsp; ] [DEBUG] - CecRemote: Command: RoutingChange Parameters: 100120[2014-02-15 08:37:35,429] [Log&nbsp; ] [38&nbsp; ] [DEBUG] - CecRemote: Command: SetStreamPath Parameters: 120[2014-02-15 08:37:35,593] [Log&nbsp; ] [38&nbsp; ] [DEBUG] - CecRemote: Command: VendorCommandWithId Parameters: 0E036D5[2014-02-15 08:37:35,762] [Log&nbsp; ] [38&nbsp; ] [DEBUG] - CecRemote: Command: VendorCommandWithId Parameters: 0E036D8</blockquote>

[QUOTE="Pucco, post: 1063736, member: 20358"] The log from post #253 is with settings from post #252 as shown in appended image. On the AVR input is set to BD-input (HDMI) and output to the TV is HDMIout-1 HDMI-Control is set to ON. Standby Through is set to BD-input The TV input is set to INPUT-4 (HDMI-1) Aquos-Link (Sharp-CEC) is enabled for HDMI-1 Aquos-Link is set to power on/off the AVR together with the TV. Allways works, even when connection with the HTPC is lost. Aquos-Link is set to controll audio volume in the AVR. Allways works, even when connection with the HTPC is lost. I changed the input on the AVR from BD to HDMI-1 and got the following log entry that differs from the previous log. RoutinChange Parameters: 100110 for BD and 100120 for HDMI-1 SetStreamPath Parameters: 110 for BD and 120 for HDMI-1 There is no change in behaviour. The TV still thinks it is in local mode (except for power commands and audio volume). Switch to VIDEO-1 input on AVR [2014-02-15 08:37:18,781] [Log ] [38 ] [DEBUG] - CecRemote: Command: VendorCommandWithId Parameters: 0E036D5 [2014-02-15 08:37:18,950] [Log ] [38 ] [DEBUG] - CecRemote: Command: VendorCommandWithId Parameters: 0E036D8 Switch to HDMI-1 input on AVR [2014-02-15 08:37:33,646] [Log ] [38 ] [DEBUG] - CecRemote: Command: VendorCommandWithId Parameters: 0E036D5 [2014-02-15 08:37:33,816] [Log ] [38 ] [DEBUG] - CecRemote: Command: VendorCommandWithId Parameters: 0E036D8 [2014-02-15 08:37:34,909] [Log ] [38 ] [DEBUG] - CecRemote: Command: RoutingChange Parameters: 100120 [2014-02-15 08:37:35,429] [Log ] [38 ] [DEBUG] - CecRemote: Command: SetStreamPath Parameters: 120 [2014-02-15 08:37:35,593] [Log ] [38 ] [DEBUG] - CecRemote: Command: VendorCommandWithId Parameters: 0E036D5 [2014-02-15 08:37:35,762] [Log ] [38 ] [DEBUG] - CecRemote: Command: VendorCommandWithId Parameters: 0E036D8 [/QUOTE]

Verification