MediaPortal Version: 1.1.0 RC2
MediaPortal Skin: Blue Three (wide)
Windows Version: WinXP Pro SP3
CPU Type: AMD Phenom 9600
HDD: Seagate C: 750GB / D: 1.5TB
Memory: Corsair 4GB
Motherboard: Gigabyte GA-MA790FX-DQ6
Video Card: XFX Nvidia 8800GTS 512Mb
Video Card Driver: 196.21
Sound Card: Creative SB X-Fi Platinum
Sound Card AC3: Optical out
Sound Card Driver:
1. TV Card: Hauppauge HVR4000
1. TV Card Type: Hybrid Analog, DVB-S, DVB-S2, DVB-T
1. TV Card Driver:
2. TV Card: Hauppauge HVR2200
2. TV Card Type: Hybrid DVB-T, Analog
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Nvidia Video Decoder
MPEG2 Audio Codec: Nvidia Audio Decoder
h.264 Video Codec: Power DVD9
Satelite/CableTV Provider: Optus D1
HTPC Case: Cooler Master
Cooling: Fans
Power Supply: 700W
Remote: MCE
TV: Sony Bravia SXRD 60 inch
TV - HTPC Connection: HDMI
I've just upgraded from 1.0.2 to 1.1.0 RC2. All of the channels I had set-up in the previous release have imported fine.
I've just scanned in a new channel (C42) on DVB-S and also the same channel on DVB-T. I already have a few channels set-up like this and use the DVB-S source for EPG grabbing only and record from DVB-T. However when I combined the channels this time they appear correctly as one channel in TV server > TV Channels > Channels with Types correctly listed as DVB-S, DVB-T but the channel appears twice in the All Channels Tab with the same channel number. It also shows up twice in MediaPortal. Deleting one of the entries from the All Channels Tab deletes them both.
I didn't have this issue setting up other channels in a similar way with 1.0.2 and I don't believe I'm doing the process differently.
Thanks
MediaPortal Skin: Blue Three (wide)
Windows Version: WinXP Pro SP3
CPU Type: AMD Phenom 9600
HDD: Seagate C: 750GB / D: 1.5TB
Memory: Corsair 4GB
Motherboard: Gigabyte GA-MA790FX-DQ6
Video Card: XFX Nvidia 8800GTS 512Mb
Video Card Driver: 196.21
Sound Card: Creative SB X-Fi Platinum
Sound Card AC3: Optical out
Sound Card Driver:
1. TV Card: Hauppauge HVR4000
1. TV Card Type: Hybrid Analog, DVB-S, DVB-S2, DVB-T
1. TV Card Driver:
2. TV Card: Hauppauge HVR2200
2. TV Card Type: Hybrid DVB-T, Analog
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Nvidia Video Decoder
MPEG2 Audio Codec: Nvidia Audio Decoder
h.264 Video Codec: Power DVD9
Satelite/CableTV Provider: Optus D1
HTPC Case: Cooler Master
Cooling: Fans
Power Supply: 700W
Remote: MCE
TV: Sony Bravia SXRD 60 inch
TV - HTPC Connection: HDMI
I've just upgraded from 1.0.2 to 1.1.0 RC2. All of the channels I had set-up in the previous release have imported fine.
I've just scanned in a new channel (C42) on DVB-S and also the same channel on DVB-T. I already have a few channels set-up like this and use the DVB-S source for EPG grabbing only and record from DVB-T. However when I combined the channels this time they appear correctly as one channel in TV server > TV Channels > Channels with Types correctly listed as DVB-S, DVB-T but the channel appears twice in the All Channels Tab with the same channel number. It also shows up twice in MediaPortal. Deleting one of the entries from the All Channels Tab deletes them both.
I didn't have this issue setting up other channels in a similar way with 1.0.2 and I don't believe I'm doing the process differently.
Thanks