Reply to thread

Message

<blockquote data-quote="MJGraf" data-source="post: 693457" data-attributes="member: 17886">Just tested the DD Duoflex CT with CI-Module and I just can't get it to work...I'm using the card as DVB-C Card. In the DD-Tool I therefore unchecked &quot;DVB-T&quot; abd &quot;DVB-C WMC&quot; for both tuners. In the CI-Module there is an Alphacrypt Classic with a UnityMedia UM02 Card. The cable is only connected to &quot;Tuner 3&quot; (There is only one DD card with two tuners, but I already tried another PCIe slot and since then there are &quot;Tuner 3&quot; and &quot;Tuner 4&quot; instead of &quot;Tuner 1&quot; and &quot;Tuner 2&quot;).OS is Win7 x64, DD-Driver version is 2.0.0.23 x64MP 1.1.2 with TV-Server from first post.The problem is: as soon as I assign the CI to one or both of the tuners, MP doesn't find any chanels although it tells me that the signal level and signal quality are perfect.I've attached a clean log where I did the following:First the CI wasn't assigned to any tuner in the DD-Tool. I did a channel scan with &quot;Tuner 3&quot; on a specific transponder with only unscrambled channels. The result was it found seven unscrambled&nbsp; tv channels: perfect.Then I fired up the DD-Tool and assigned the CI to &quot;Tuner 3&quot; and did a reboot. Opened TV-Server-Config, set &quot;CAM enabled and present for this card&quot; on &quot;Tuner 3&quot; (CAM limit 0, CAM model default), the TV service was automatically restarted and I scanned exactly the same transponder again. Result: No channels found. Once again, there are only uncsrambled channels on that transponder.Morpheus, could you please have a look at the logs? Thanks in advance and please let me know when you need something else or when I should test something.Michael</blockquote>

[QUOTE="MJGraf, post: 693457, member: 17886"] Just tested the DD Duoflex CT with CI-Module and I just can't get it to work... I'm using the card as DVB-C Card. In the DD-Tool I therefore unchecked "DVB-T" abd "DVB-C WMC" for both tuners. In the CI-Module there is an Alphacrypt Classic with a UnityMedia UM02 Card. The cable is only connected to "Tuner 3" (There is only one DD card with two tuners, but I already tried another PCIe slot and since then there are "Tuner 3" and "Tuner 4" instead of "Tuner 1" and "Tuner 2"). OS is Win7 x64, DD-Driver version is 2.0.0.23 x64 MP 1.1.2 with TV-Server from first post. The problem is: as soon as I assign the CI to one or both of the tuners, MP doesn't find any chanels although it tells me that the signal level and signal quality are perfect. I've attached a clean log where I did the following: First the CI wasn't assigned to any tuner in the DD-Tool. I did a channel scan with "Tuner 3" on a specific transponder with only unscrambled channels. The result was it found seven unscrambled tv channels: perfect. Then I fired up the DD-Tool and assigned the CI to "Tuner 3" and did a reboot. Opened TV-Server-Config, set "CAM enabled and present for this card" on "Tuner 3" (CAM limit 0, CAM model default), the TV service was automatically restarted and I scanned exactly the same transponder again. Result: No channels found. Once again, there are only uncsrambled channels on that transponder. Morpheus, could you please have a look at the logs? Thanks in advance and please let me know when you need something else or when I should test something. Michael [/QUOTE]

Verification