Reply to thread

Message

Hi Morpheus,
thanks for following this but hold on with asking the developers. It took about 1:30h and then it froze... hope is gone (just kidding...). But I should have been suspicious when reading that Vasilich has exactly the same problem but doesn't use a cam at all...

Just running Test 12:
Disabled CAM for both tuners in DD config tool. Uncecked cam for both tuners in SetupTV. Rebooted and plugged off the ribbon cable of the CI-Module completely.
stress test running with only fta channels for 20 minutes now. about 500 tunes, 15 of which are errors (no video/audio detected - also very similar to what Vasilich reported).
But no freeze so far. Will report back...
/progress report
Running for about 1:40h now. 1.750 tunes, 50 of which failed (not video/audio detected). Average tune time is about 3.600ms, about twice the time as with my "favourite channels group", which includes scrambled channels as well. The long tune time seems to result from the 50 errors, for which it takes like 15 seconds or so until it goes on with the next channel. But I'm still suspicious because Vasilich said he doesn't even own a CI-Module or CAM.
Vasilich, is this correct? You say that you "have no CAM module". Do you mean that you have a CI-Module which is connected but you don't have a CAM to put into it? Or do you mean you don't even have a CI-Module?

<blockquote data-quote="MJGraf" data-source="post: 730982" data-attributes="member: 17886">Hi Morpheus,thanks for following this but hold on with asking the developers. It took about 1:30h and then it froze... hope is gone (just kidding...). But I should have been suspicious when reading that Vasilich has exactly the same problem but doesn't use a cam at all...Just running Test 12:Disabled CAM for both tuners in DD config tool. Uncecked cam for both tuners in SetupTV. Rebooted and plugged off the ribbon cable of the CI-Module completely.stress test running with only fta channels for 20 minutes now. about 500 tunes, 15 of which are errors (no video/audio detected - also very similar to what Vasilich reported).But no freeze so far. Will report back.../progress reportRunning for about 1:40h now. 1.750 tunes, 50 of which failed (not video/audio detected). Average tune time is about 3.600ms, about twice the time as with my &quot;favourite channels group&quot;, which includes scrambled channels as well. The long tune time seems to result from the 50 errors, for which it takes like 15 seconds or so until it goes on with the next channel. But I'm still suspicious because Vasilich said he doesn't even own a CI-Module or CAM. Vasilich, is this correct? You say that you &quot;have no CAM module&quot;. Do you mean that you have a CI-Module which is connected but you don't have a CAM to put into it? Or do you mean you don't even have a CI-Module?</blockquote>

[QUOTE="MJGraf, post: 730982, member: 17886"] Hi Morpheus, thanks for following this but hold on with asking the developers. It took about 1:30h and then it froze... hope is gone (just kidding...). But I should have been suspicious when reading that Vasilich has exactly the same problem but doesn't use a cam at all... Just running Test 12: Disabled CAM for both tuners in DD config tool. Uncecked cam for both tuners in SetupTV. Rebooted and plugged off the ribbon cable of the CI-Module completely. stress test running with only fta channels for 20 minutes now. about 500 tunes, 15 of which are errors (no video/audio detected - also very similar to what Vasilich reported). But no freeze so far. Will report back... /progress report Running for about 1:40h now. 1.750 tunes, 50 of which failed (not video/audio detected). Average tune time is about 3.600ms, about twice the time as with my "favourite channels group", which includes scrambled channels as well. The long tune time seems to result from the 50 errors, for which it takes like 15 seconds or so until it goes on with the next channel. But I'm still suspicious because Vasilich said he doesn't even own a CI-Module or CAM. Vasilich, is this correct? You say that you "have no CAM module". Do you mean that you have a CI-Module which is connected but you don't have a CAM to put into it? Or do you mean you don't even have a CI-Module? [/QUOTE]