- September 18, 2006
- 848
- 53
- Home Country
- Belgium
MediaPortal Version: 0.2.1
MediaPortal Skin:
Windows Version: xp sp2
CPU Type: AMD Athlon 64 Venice 3200+
HDD: 200GB Seagate Barracuda 7200.9 SATA-300 NCQ
Memory: Apacer DDR PC3200 1024MB LFT
Motherboard: Asus A8N8L
Motherboard Chipset: Nvidia Nforce 4
Motherboard Bios: Asus 0401
Video Card: 6150 integrated graphics
Video Card Driver: ForceWare 93.71
Sound Card: Onboard RTL ALC655
Sound Card AC3:
Sound Card Driver: 5.10.0.5200
1. TV Card: Hauppauge Win/TV PVR 350
1. TV Card Type:
1. TV Card Driver: 1.18.21.22266
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
Satelite/CableTV Provider:
HTPC Case: Asus Pundit
Cooling: Standard
Power Supply: Standard
Remote: Hauppauge silver 45 buttons
TV: Sony KV-29FX20B
TV - HTPC Connection: Scart -> Scart convertor -> S-Video
I'm using my system as a desktop pc and as a htpc as well and depending on the use, I have a different windows account/profile which for htpc use I stop a few extra services, anti-virus, increased sound volume, etc
I'm doing this with a batch file in my startup folder for htpc use and now I was wondering if there would be a possibility to also change the display setup.
My system cannot use dualview so either the signal goes to the tv-out or the DVI/D-sub connector.
Does anyone have a clue if there is a way through a batch file to switch between these 2 outputs?
Thanks a lot in advance!
Peter.
MediaPortal Skin:
Windows Version: xp sp2
CPU Type: AMD Athlon 64 Venice 3200+
HDD: 200GB Seagate Barracuda 7200.9 SATA-300 NCQ
Memory: Apacer DDR PC3200 1024MB LFT
Motherboard: Asus A8N8L
Motherboard Chipset: Nvidia Nforce 4
Motherboard Bios: Asus 0401
Video Card: 6150 integrated graphics
Video Card Driver: ForceWare 93.71
Sound Card: Onboard RTL ALC655
Sound Card AC3:
Sound Card Driver: 5.10.0.5200
1. TV Card: Hauppauge Win/TV PVR 350
1. TV Card Type:
1. TV Card Driver: 1.18.21.22266
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
Satelite/CableTV Provider:
HTPC Case: Asus Pundit
Cooling: Standard
Power Supply: Standard
Remote: Hauppauge silver 45 buttons
TV: Sony KV-29FX20B
TV - HTPC Connection: Scart -> Scart convertor -> S-Video
I'm using my system as a desktop pc and as a htpc as well and depending on the use, I have a different windows account/profile which for htpc use I stop a few extra services, anti-virus, increased sound volume, etc
I'm doing this with a batch file in my startup folder for htpc use and now I was wondering if there would be a possibility to also change the display setup.
My system cannot use dualview so either the signal goes to the tv-out or the DVI/D-sub connector.
Does anyone have a clue if there is a way through a batch file to switch between these 2 outputs?
Thanks a lot in advance!
Peter.