Netherlands
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 (2006-07-10)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: MPA
Video Codec: MPV
CPU Type: Intel Pentium 4 - 2.40GHz
Memory: 511 MB
Motherboard: P4S533MX (ASUSTeK Computer INC.)
TV Card Model: Hauppauge PVR350
TV Card Type: Analog, hardware encoding
TV Card Driver: 1.18.21.22266
Video Card Model: Nvidia Geforce FX 5200 (128 MB)
Video Card Driver: 7.1.8.9
Video Card Resolution: 800x600
Video Render Type: ?
Audio Card Model: Creative Audigy Audio Processor (WDM)
Audio Card Driver: 5.12.5.441
Synopsis:: -
Hello,
I've been a happy MP user for over a year now, but I can't get MP2.0 to work properly. Install and configuration all went ok, but when playing tv, the image freezes after a minute or so of playback. It's not a full lockup, the pc still responds to the keyboard, it's just the screen that's not updated. In general, I can get back to a normal state by closing MP with Alt-F4, putting the pc in standby and waking it up again. From the log what strikes me most is "No signal detected". This is not a hardware type of problem, because my tv card performed ok while running MP versions RC2 and before. I also saw: error message "switching to reference rasterizer", setup application locking up, sudden pc reset and other unstable behaviour. The little animation of the MP logo runs jerky, but CPU usage is normal.
I'll try to upload the log as well. I'm also going to try to reinstall my RC2 backup to see if the unstable behaviour disppears.
Hope someone give me some pointers as to what I need to check.
Thanks,
Count Filipp
MediaPortal Version: 0.2.0.0 (2006-07-10)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: MPA
Video Codec: MPV
CPU Type: Intel Pentium 4 - 2.40GHz
Memory: 511 MB
Motherboard: P4S533MX (ASUSTeK Computer INC.)
TV Card Model: Hauppauge PVR350
TV Card Type: Analog, hardware encoding
TV Card Driver: 1.18.21.22266
Video Card Model: Nvidia Geforce FX 5200 (128 MB)
Video Card Driver: 7.1.8.9
Video Card Resolution: 800x600
Video Render Type: ?
Audio Card Model: Creative Audigy Audio Processor (WDM)
Audio Card Driver: 5.12.5.441
Synopsis:: -
Hello,
I've been a happy MP user for over a year now, but I can't get MP2.0 to work properly. Install and configuration all went ok, but when playing tv, the image freezes after a minute or so of playback. It's not a full lockup, the pc still responds to the keyboard, it's just the screen that's not updated. In general, I can get back to a normal state by closing MP with Alt-F4, putting the pc in standby and waking it up again. From the log what strikes me most is "No signal detected". This is not a hardware type of problem, because my tv card performed ok while running MP versions RC2 and before. I also saw: error message "switching to reference rasterizer", setup application locking up, sudden pc reset and other unstable behaviour. The little animation of the MP logo runs jerky, but CPU usage is normal.
I'll try to upload the log as well. I'm also going to try to reinstall my RC2 backup to see if the unstable behaviour disppears.
Hope someone give me some pointers as to what I need to check.
Thanks,
Count Filipp