Double response from Medion X10 remote (1 Viewer)

[johnmb]

Hi,
Thought I had seen something about this somewhere, but have been unable to find it again...
I intermittently (but most of the time) get a double response when using my remote ie press "down" once and it moves down 2 selections. I have made sure that the native X10 software has been uninstalled, and have the Medion X10 selected as the remote. If I select the MCE remote, the movements are correct (ie 1 is 1) but many of the keys don't map. (and can't figure out how to map them...)
The following is an example of pressing down twice, the first time I get a single response, the second, a dual response (moved down 2 selections....)
2007-03-25 20:09:08.697021 [Info.][MPMain]: X10Remote: Command Start --------------------------------------------
2007-03-25 20:09:08.697021 [Info.][MPMain]: X10Remote: e = AxX10._DIX10InterfaceEvents_X10CommandEvent
2007-03-25 20:09:08.697997 [Info.][MPMain]: X10Remote: bszCommand = Up
2007-03-25 20:09:08.697997 [Info.][MPMain]: X10Remote: eCommand = 19 - X10CMD_UP
2007-03-25 20:09:08.698974 [Info.][MPMain]: X10Remote: eCommandType = X10COMM_EXTENDED
2007-03-25 20:09:08.698974 [Info.][MPMain]: X10Remote: eKeyState = X10KEY_OFF
2007-03-25 20:09:08.699950 [Info.][MPMain]: X10Remote: lAddress = 0
2007-03-25 20:09:08.699950 [Info.][MPMain]: X10Remote: lSequence = 1
2007-03-25 20:09:08.699950 [Info.][MPMain]: X10Remote: varTimestamp = 25/03/2007 10:08:05 AM
2007-03-25 20:09:08.700927 [Info.][MPMain]: X10Remote: Command End ----------------------------------------------
2007-03-25 20:09:10.383436 [Info.][MPMain]: X10Remote: Command Start --------------------------------------------
2007-03-25 20:09:10.383436 [Info.][MPMain]: X10Remote: e = AxX10._DIX10InterfaceEvents_X10CommandEvent
2007-03-25 20:09:10.384413 [Info.][MPMain]: X10Remote: bszCommand = Down
2007-03-25 20:09:10.384413 [Info.][MPMain]: X10Remote: eCommand = 12 - X10CMD_DN
2007-03-25 20:09:10.385389 [Info.][MPMain]: X10Remote: eCommandType = X10COMM_EXTENDED
2007-03-25 20:09:10.385389 [Info.][MPMain]: X10Remote: eKeyState = X10KEY_ON
2007-03-25 20:09:10.386366 [Info.][MPMain]: X10Remote: lAddress = 0
2007-03-25 20:09:10.386366 [Info.][MPMain]: X10Remote: lSequence = 0
2007-03-25 20:09:10.386366 [Info.][MPMain]: X10Remote: varTimestamp = 25/03/2007 10:08:05 AM
2007-03-25 20:09:10.387342 [Info.][MPMain]: X10Remote: Command End ----------------------------------------------
2007-03-25 20:09:10.388319 [Info.][MPMain]: X10Remote: Action mapped
2007-03-25 20:09:10.674433 [Info.][MPMain]: X10Remote: Command Start --------------------------------------------
2007-03-25 20:09:10.674433 [Info.][MPMain]: X10Remote: e = AxX10._DIX10InterfaceEvents_X10CommandEvent
2007-03-25 20:09:10.675410 [Info.][MPMain]: X10Remote: bszCommand = Down
2007-03-25 20:09:10.675410 [Info.][MPMain]: X10Remote: eCommand = 12 - X10CMD_DN
2007-03-25 20:09:10.676386 [Info.][MPMain]: X10Remote: eCommandType = X10COMM_EXTENDED
2007-03-25 20:09:10.676386 [Info.][MPMain]: X10Remote: eKeyState = X10KEY_OFF
2007-03-25 20:09:10.677363 [Info.][MPMain]: X10Remote: lAddress = 0
2007-03-25 20:09:10.677363 [Info.][MPMain]: X10Remote: lSequence = 1
2007-03-25 20:09:10.677363 [Info.][MPMain]: X10Remote: varTimestamp = 25/03/2007 10:08:05 AM
2007-03-25 20:09:10.678339 [Info.][MPMain]: X10Remote: Command End ----------------------------------------------

Thanks, John.

 

[The_Stig]

This had been an issue some time ago. Should be fixed with current SVN. Do you use stable build or an svn?

Regards

 

[johnmb]

Hi, have just found the other thread: https://forum.team-mediaportal.com/x10_remote_experiencing_double_clicks-t11986p8.html and tried the options suggested. Have downloaded the latest SVN (03-25-2007) and still have the same issue. Have also tried to obtain the x10net.dll from http://www.snapstream.net/download/Firefly_Drivers.aspx, but when I try to run the file get an "application failed to initialise properly....." error (I am using Vista...??). Have re-downloaded - same error.....
Should I move this to the other thread?
Thanks for your quick response.

 

[johnmb]

Hmmmmm... And of course after having said that, it now appears to be working OK... Just like magic! 'Bout to hit the sack, so will retest tomorrow evening...

 

[The_Stig]

Good to know