DVB-S card not getting a signal - Twinhan 1020a (1 Viewer)

[jaysonp]

TV-Server Version: TVEngine 0.3 17110
MediaPortal Version: V0.2.3.0
MediaPortal Skin: Blue Two Wide
Windows Version: Windows XP SP2 + all updates
CPU Type: Pentium 4 2.4Ghz
HDD: 1 - 80 GB, 1 250GB both IDE
Memory: 512 MB
Motherboard:
Motherboard Chipset:
Motherboard Bios:
Video Card: Nvidia GeForce 6200
Video Card Driver: Nvidia GeForce 6200 ver. 6.14.11.6921 12/5/2007
Sound Card: Creative SB Live! Series
Sound Card AC3:
Sound Card Driver: Creative SB Live! Series (WDM)
1. TV Card: Vision Plus Twinhan 1020a
1. TV Card Type: DVB-S
1. TV Card Driver: DVB-TV 878 Digital Tuner Driver (DVBS-MCE)
MPEG2 Video Codec: MPV Decoder Filter
MPEG2 Audio Codec: MPA Decoder Filter
Satelite/CableTV Provider: FTA
HTPC Case: None
Cooling:
Power Supply: 350W
Remote: Twinhan
TV: 42" Panasonic Viera
TV - HTPC Connection: Component

I have just setup Media portal with TV Server. I am trying to get my Twinhan card setup to recieve a signal from my existing dish pointing at B3V 91, I have a DiSEqC swithch with 91 in port 1. My card shows up under TV servers. When I check the LNB setup I set it as this:
Sat #1, Level1AA, Ku-Linear (universal), 91.0W Galaxy 11 and Nimiq1
(I have tried different options for the Diseqc, None, SimpleA)

When I go to the Scanning tab Signal level and Signal Quality are 0. If I do a scan it's obviously comes back as no signal. Any advice?

 

[mamuli]

Sat #1, Level1AA, Ku-Linear (universal), 91.0W Galaxy 11 and Nimiq1

Try Sat #1, Level1AA, NA Legacy, 91.0W Galaxy 11 and Nimiq1

 

[twiddler]

I have the same problem with my tiwnhan 1020a and diseqc switch. I found that MP is not compatible with diseqc switches, or at least not in my situation. It works fine in dvbdream, but I notice I have to rescan my channels after running MP. Somehow MP messes up the switch.