Reply to thread

Message

<blockquote data-quote="gurabli" data-source="post: 1030131" data-attributes="member: 105904">hiI think it is working, but not perfectly. I have installed the card.1. Aligned the dish to 28.2E with STB, checked signal, everything fine.2. plugged the coax to dvbsky card3. went to diseqc motor tab, stored the position with 28.2E selected4. went to channel scanning, updated satellites list, selected 28.2E, scanned the channels, found all the channels I can receive (did not select anything under diseqc)5. everything is working fine6. moved the coax back to stb, aligned the dish to 39.0E, everything working fine7. moved the coax back to dvbsky8. selected 39E under diseqc motor, stored the position, position stored under next number9. scanned for channels, all channels found, everything is working fineIf I start manual control and select a channel on 39E, timeshifting works perfectly. But if I select a channel from 28.2E, the dish doesn't move, I get no signal error.BUT, if I go to diseqc motor setting and select 28.2E and click GOTO, the dish moves from 39E to 28.2E!! I trz timeshifting and everything works fine!Basically what we need to achieve is to instruct motor movement if I select a channel from a different sat. Is it possible to do? Or maybe I have done something wrong? I should select sat, scan for channels, and store the position AFTER? I do not have any idea. I hope the logs will help you! And I hope the fact that motor is moving on manual tv server command helps it to fix this issue more easily.Looking very much forward to your answer (and help), it is so close to perfect now!Many thanks!</blockquote>

[QUOTE="gurabli, post: 1030131, member: 105904"] hi I think it is working, but not perfectly. I have installed the card. 1. Aligned the dish to 28.2E with STB, checked signal, everything fine. 2. plugged the coax to dvbsky card 3. went to diseqc motor tab, stored the position with 28.2E selected 4. went to channel scanning, updated satellites list, selected 28.2E, scanned the channels, found all the channels I can receive (did not select anything under diseqc) 5. everything is working fine 6. moved the coax back to stb, aligned the dish to 39.0E, everything working fine 7. moved the coax back to dvbsky 8. selected 39E under diseqc motor, stored the position, position stored under next number 9. scanned for channels, all channels found, everything is working fine If I start manual control and select a channel on 39E, timeshifting works perfectly. But if I select a channel from 28.2E, the dish doesn't move, I get no signal error. BUT, if I go to diseqc motor setting and select 28.2E and click GOTO, the dish moves from 39E to 28.2E!! I trz timeshifting and everything works fine! Basically what we need to achieve is to instruct motor movement if I select a channel from a different sat. Is it possible to do? Or maybe I have done something wrong? I should select sat, scan for channels, and store the position AFTER? I do not have any idea. I hope the logs will help you! And I hope the fact that motor is moving on manual tv server command helps it to fix this issue more easily. Looking very much forward to your answer (and help), it is so close to perfect now! Many thanks! [/QUOTE]

Verification