Reply to thread

Message: <blockquote data-quote="gurabli" data-source="post: 1030440" data-attributes="member: 105904">Hello mm!I hope these are great news, I mean the Hauppauge DiSEqC interface usage.In exactly which log file should I check for the diseqc command being sent or not?I have read in another thread that I should check the tvdatabase and see which motor position is assigned to which sat (satindex, if I'm correct). But where is this file located and and how to open the database file?I pretty much hope that the fact that motor is able to move on goto function and it is reacting on diseqc commands in tvserver motor control window means that the fix for the channel change sending diseqc commands is not so hard or impossible to add.Of course, I will do a rescan, if you need even 10 times<img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite1" alt=":)" title="Smile    :)" loading="lazy" data-shortname=":)" /> I have just two satellites added at the moment (28,2E and 39E) to setup motor control, once it is fully functional, I will add all the sats I need. I will delete all the channels, clear the logs, and then do the whole rescan.Can you confirm that the proper way to do this is:I. dish is aligned to 28,2E properly,1) I press store position BEFORE scanning channelsOR2) before pressing store position I scan the channels and AFTER the scan is completed I store position?I just cant remember how I did the first scan. By logic, both ways can result in proper sat-position settings, but I guess only one is correct.II. I align the dish to 39E (probably using my set top box) and do step I. again.I will also upgrade to MP 1.5.0.[DOUBLEPOST=1380696223][/DOUBLEPOST]Thank you DJBlu for your help as well! Wow, USALS support, that sound so great! I will try everything you need and ask, just post detailed instructions please how to do it<img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite1" alt=":)" title="Smile    :)" loading="lazy" data-shortname=":)" />As I have offered mm too, I'm more then glad to give you remote access to my htpc, and that way you could do and check everything, configure, test, access logs, etc.Send me a PM if you like the idea of remote access and there we could discuss the details.By the "the first tune will always fail unless you move the motor a couple of degrees" you mean that there is nothing we can do to have proper functionality to move the dish by a simple channel change? I desperate<img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite3" alt=":(" title="Frown    :(" loading="lazy" data-shortname=":(" /></blockquote>

Verification