DVB-S2, DVB-EPG, Timeshift (1 Viewer)

Flocke

Portal Pro
October 3, 2006
70
0
Germany
Home Country
Germany Germany
MediaPortal Version: SVN-REV12423
1. TV Card: Twinhan 7049A USB -> DVB-T
2. TV Card: Pinnacle PCTV 4xx Tuner -> DVB-S2

Hi...

i have installed the last SVN-Version from MP and TVS3. 1st thx for the DVB-S2 Support!!! Great!

but i have found some Bugs:

three HD-Channels was found as Radio (Astra HD):

Code:
30.12.2006 13:54:00 Found: DVBS:radio:CSAT CANAL+ HI-TECH HD Freq:12522000 ONID:1 TSID:1106 SID:9201 PMT:500 FTA:False LCN:10000 SymbolRate:22000 Modulation:Mod8Vsb Polarisation:LinearV InnerFecRate:Rate2_3 DisEqc:None band:Universal
30.12.2006 13:54:00 Found: DVBS:radio:CSAT NATIONAL GEO HD Freq:12522000 ONID:1 TSID:1106 SID:9202 PMT:501 FTA:False LCN:10000 SymbolRate:22000 Modulation:Mod8Vsb Polarisation:LinearV InnerFecRate:Rate2_3 DisEqc:None band:Universal
30.12.2006 13:54:00 Found: DVBS:tv:CSAT TF1 HD Freq:12522000 ONID:1 TSID:1106 SID:9204 PMT:503 FTA:False LCN:10000 SymbolRate:22000 Modulation:Mod8Vsb Polarisation:LinearV InnerFecRate:Rate2_3 DisEqc:None band:Universal
30.12.2006 13:54:00 Found: DVBS:radio:IMEDIA CANAL HD TEST 3 Freq:12522000 ONID:1 TSID:1106 SID:9220 PMT:513 FTA:False LCN:10000 SymbolRate:22000 Modulation:Mod8Vsb Polarisation:LinearV InnerFecRate:Rate2_3 DisEqc:None band:Universal

DVB-EPG broken?:

EPG.log shows all grapped Transponders, but it save not an PMT-File in the PMT-Directory.. i have selected all TV-Channels and all Languages in the TVServer-Settings.. but in the MP-Mainprogramm under Settings -> TV -> DVB-EPG i see only Radiochannels.. and in MP all TV-Channels have empty EPG-Data...

Timeshift and Channelchange:

sometime when i change a TV-Channel then MP shows an old Timeshiftrecord.. not the new TV-Channel..


Two TV-Receivers:

i have two TV- Receivers.. DVB-T and DVB-S2.. if i connected both Receivers, then the TV-Servers find only Channels for DVB-T.. DVB-S run fast over all Transponders.. "No Signal".. when i disconnect DVB-T an Re-Start the TVService then the Channelscan works fine..


if i 1st connect DVB-S and scan all channels and finish TVService and 2st connect DVB-T and Restart TVService and Setup DVB-T, then the EPG is confused:

Code:
30.12.2006 19:15:41 EPG: grabber initialized for 75 transponders..
30.12.2006 19:16:11 epg:Grab for transponder #23 type:3 freq:12363000 mod:-1 sr:27500 bw:8 pol:2
30.12.2006 19:16:12 Epg: card:-1 could not start dvbc grabbing
30.12.2006 19:16:12 epg:Grab for transponder #7 type:4 freq:594000 mod:0 sr:0 bw:8 pol:0
30.12.2006 19:16:13 Epg: card:2 start grab DVBT:tv:ABSAT TERRA NOVA Freq:594000 ONID:8468 TSID:8707 SID:16422 PMT:260 FTA:True LCN:10000 BandWidth:8

Card:-1..dvbc?! :confused:

--------------------------------------------------------------------

i hope anyone can understand my broken english.. :)

best wishes for 2007!

Flocke
 

Users who are viewing this thread

Top Bottom