TV-Server Version: 16587
MediaPortal Version: 16587
MediaPortal Skin: Blue Two
Windows Version: XP SP2
CPU Type: P4 2.6gHz
HDD: seagate 40GB Samsung 160GB
Memory: 1GB DDR400
Motherboard: Acer/MSI P4 SIS
Motherboard Chipset: SIS 640gx
Motherboard Bios: R03
Video Card: 7300GT AGP
Video Card Driver: latest
Sound Card: SBLIVE! 5.1
Sound Card AC3: SBLIVE! 5.1
Sound Card Driver: Final
1. TV Card: Twinhan 3020 PCI
1. TV Card Type: DVB-T
1. TV Card Driver: Final
2. TV Card: Dvico FusionHDTV Dual Digital 4
2. TV Card Type: DVB-T
2. TV Card Driver: 3.63.01
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: powerdvd 7
MPEG2 Audio Codec: mpa
Satelite/CableTV Provider:
HTPC Case: atx
Cooling: 80mm fans
Power Supply: 420 tt
Remote: Fusionhdtv MCE
TV: CRT
TV - HTPC Connection: svideo
When trying to change to the Australian channel "SBS" or "SBSHD" using the Dvico FusionHDTV dual digital 4, the picture and video never start. I can change back to another station after a short time and the other station works perfectly. Change back to SBS or SBSHD and no picture or video.
SBS and SBSHD work fine with the Dvico fusion HDTV software. The signal is very strong in its signal meter.
In the logs, I found a lot of lines with "subch:0 wait for pmt 400" like below when there was no video/audio:
These channels work fine with the old Twinhan card.
MediaPortal Version: 16587
MediaPortal Skin: Blue Two
Windows Version: XP SP2
CPU Type: P4 2.6gHz
HDD: seagate 40GB Samsung 160GB
Memory: 1GB DDR400
Motherboard: Acer/MSI P4 SIS
Motherboard Chipset: SIS 640gx
Motherboard Bios: R03
Video Card: 7300GT AGP
Video Card Driver: latest
Sound Card: SBLIVE! 5.1
Sound Card AC3: SBLIVE! 5.1
Sound Card Driver: Final
1. TV Card: Twinhan 3020 PCI
1. TV Card Type: DVB-T
1. TV Card Driver: Final
2. TV Card: Dvico FusionHDTV Dual Digital 4
2. TV Card Type: DVB-T
2. TV Card Driver: 3.63.01
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: powerdvd 7
MPEG2 Audio Codec: mpa
Satelite/CableTV Provider:
HTPC Case: atx
Cooling: 80mm fans
Power Supply: 420 tt
Remote: Fusionhdtv MCE
TV: CRT
TV - HTPC Connection: svideo
When trying to change to the Australian channel "SBS" or "SBSHD" using the Dvico FusionHDTV dual digital 4, the picture and video never start. I can change back to another station after a short time and the other station works perfectly. Change back to SBS or SBSHD and no picture or video.
SBS and SBSHD work fine with the Dvico fusion HDTV software. The signal is very strong in its signal meter.
In the logs, I found a lot of lines with "subch:0 wait for pmt 400" like below when there was no video/audio:
Code:
2007-12-20 17:44:05.625000 [8]: subch:0 SetupPmtGrabber:pid 400 sid:330
2007-12-20 17:44:05.625000 [8]: subch:0 set pmt grabber pmt:400 sid:330
2007-12-20 17:44:05.625000 [8]: subch:0 wait for pmt 400
2007-12-20 17:44:05.656250 [8]: subch:0 wait for pmt 400
2007-12-20 17:44:05.671875 [8]: subch:0 wait for pmt 400
2007-12-20 17:44:05.687500 [8]: subch:0 wait for pmt 400
2007-12-20 17:44:05.718750 [8]: subch:0 wait for pmt 400
2007-12-20 17:44:05.734375 [8]: subch:0 wait for pmt 400
2007-12-20 17:44:05.750000 [8]: subch:0 wait for pmt 400
2007-12-20 17:44:05.781250 [8]: subch:0 wait for pmt 400
2007-12-20 17:44:05.796875 [8]: subch:0 wait for pmt 400
These channels work fine with the old Twinhan card.