Echostar 119W Scans with signal but zero Channels (1 Viewer)

[yakstuff]

I am scanning 119W Echostar aka Dishnetwork in North America. I have a Dishpro (bandstacked) ini file. I modified the echostar 7 .tpl slightly to account for a dishpro 500 lnb. I also tried with the original *.tpl with the same negative result.

Also I have a file "TwinhanWDM.ddp" that I got from DVBN forums, because the LOF for LNB1 needs to be 11250 not 10600.

The scanning bars show it getting signal strength and quality, but zero channels are added. I have seen a post that blames the wrong LOF as the culprit, but with this plugin cures that and still zero channels.

Please fix this promptly so that North America can use your promising software. That is potentially a lot of new users. Please see attatched log files. Thanks.
___________________________________________________________

MediaPortal Version: 0.2.1.0
MediaPortal Skin: blue
Windows Version: XP SP2
CPU Type: amd 2.21ghz
HDD: ST380817AS 80 gig
Memory: 1 gig
Motherboard: MS-7125
Motherboard Chipset: Nvidia Nforce4 Ultra
Motherboard Bios: Phoenix LTD 6.00 PG
Video Card: Radeon X700 256mb
Video Card Driver: 6.14.10.6635
Sound Card: on-board Realtek AC'97
Sound Card AC3: none
Sound Card Driver: alcxwdm.sys 5.10.00.6160
1. TV Card: Twinhan 1020A
1. TV Card Type: DVB-S
1. TV Card Driver: BDADriverV1.2.3.8_WHQL
2. TV Card: none
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Dscaler part of MP
MPEG2 Audio Codec: Dscaler part of MP
Satelite/CableTV Provider: echostar 119W & 110W
HTPC Case: coolmaster cavalier
Cooling: zalman
Power Supply: ATX PS2;350W
Remote: twinhan 32 button
TV: Vizeo plasma 42
TV - HTPC Connection: DVI

 

[ASiDiE]

The MPSA needs to be re-written... someone in the forums just posted about it. There are several posts about this issue.. and most of them are from me.

 

[Taipan]

Please fix this promptly so that North America can use your promising software.

Boy, what an arrogant attitude ...

This is open source software, so you are very welcome to fix it yourself if it is so important...

 

[yakstuff]

Thanks for the info ASiDiE. I did a search on "MPSA" and found some good stuff. It looks Like the problem has been around for a while, but now it looks as if a1jatt has volunteered to work on this. Very good news indeed.

Taipan...Thanks for the warm welcome to Media Portal forums. I did say please after all.

 

[a1jatt]

MPSA was part of the old tv engine. new server does not use that filter.

 

[ASiDiE]

a1jatt... if the MPSA... is not a part of the new tv engine.. which I thought it did... are you making any progress in getting dish to work in the new TV engine? Right now we are missing some importaint frequencies to be set in the new TV engine. We don't use a tone switch so 22khz does not need to be there.. and our frequency is 11250 and not 10500... like is set at default. This is all in the mantis and am hoping it will be fixed soon.

 

[ASiDiE]

a1jatt, You having in any luck with this project?

 

[a1jatt]

yes
you wanna try scanning with new tv server for me .. ?
//http://rapidshare.com/files/9485143/MediaPortal_TV_Server.zip.html

 

[ASiDiE]

Sorry I have not been around.... the only PC I have is my pocket pc.. .and I remote into my pc at home.... I will be heading home on monday and will test this out....

 

[ASiDiE]

I just tested this out.... I could not wait... It found 282 and updated 39. don't know why it's updating any channels when there are none in the list. There should also be around 375 channels on 110. Here are my logs.

http://pastebin.team-mediaportal.com/11660 - TV Log
http://pastebin.team-mediaportal.com/11661 - TS Logs.


Keep up the good work