Eror when compressing cvr-ms to mpeg (1 Viewer)

[eku60]

Hello,

Board Ga-915g-mf
P4 3.0
Windwos MCE 2005, latest rollups
TV: Terratec 1200 dvb-s, TwinHan VP-1020A
Codec Cyberlink Video and Audio coming with PowerDVD 6
no AC3 Filter, no FFDShow
My Burner plugin installed, including .ax files (execot for XVID)

Synopsis:
Selecting a file, start compression showing messages:
start, busy, error

MediaPortal.log shows:

17.05.2006 22:06:48 WindowManager:route MediaPortal.GUI.TV.GUITVCompress:612->MediaPortal.Dialogs.GUIDialogYesNo:100
17.05.2006 22:06:48 window:MediaPortal.Dialogs.GUIDialogYesNo init
17.05.2006 22:06:50 WindowManager:unroute to MediaPortal.Dialogs.GUIDialogYesNo:100->MediaPortal.GUI.TV.GUITVCompress:612
17.05.2006 22:06:50 window:MediaPortal.GUI.TV.GUITVCompress deinit
17.05.2006 22:06:50 DVR2MPG: create graph
17.05.2006 22:06:50 texturemanager:CleanupThumbs()
17.05.2006 22:06:50 DVR2MPG: add streambuffersource
17.05.2006 22:06:50 Recorder:enable dx9 exclusive mode
17.05.2006 22:06:50 DVR2MPG: load file:C:\Dokumente und Einstellungen\Elmar\Eigene Dateien\Eigene Videos\Otto-Der Film.dvr-ms
17.05.2006 22:06:50 goto fullscreen:False
17.05.2006 22:06:50 window:MediaPortal.GUI.TV.GUITVCompressStatus init
17.05.2006 22:06:50 DVR2MPG: Add Cyberlink MPEG2 multiplexer to graph
17.05.2006 22:06:50 DVR2MPG: Unable create graph
17.05.2006 22:06:50 DVR2MPG: cleanup

No idea, why the graph could not be created.
MyTV works.

Regards
eku60

 

[Callifo]

Looks like your missing the Cyberlink MPEG muxer filter.

 

[a.dimuzio]

I'm having the same problem with SVN Build: 05-10-2006 / 8:07.
I'mn sure I have the Cyberlink Muxer since I used it to convert a recording to mpeg using graphedt directly.

I'll try with a newer SVN build in the next days..

 

[eku60]

Hello Califo,

Cyberlink MPEG Muxer is installed, also CLDump.ax and Dump.ax. I used RadLightFilterManager to check this.

I have GSpot installed too. When checking the dvr-ms file with it, no audio renderer is shown, but when watching the file, audio is ok. Watching a mpeg file works too.

I'm using testrelease rc4 without any nightly build. The "myBurner" plugin is not showing and below the menu "sonstiges" (other), I have "tetris" about 10 times and it is not easy to get out there with the mouse or the remote control.

Besides this the channel switching time between MP and MCE is 10:1
(tested with TwinHan as the only card).
After switching a channel TV starts, then after about 2-3 seconds it stutters, and sometimes after that (another second later) video and audio are out of sync. This is reproducable on every channel.

When using timeshift, video and audio is totally out of sync.

Some channels have difficulties to play smooth, whereas a parallel used sat receiver works fine on the same channels (Kabel 1, Sat1, Pro7, Tele5). The stuttering is so heavy, you cannot watch these channels.
The 5.1 amplifier (Yamaha, connected via SP/DIF) is switching all the time between DTS, DD, PLII and so on (you can watch this on the display) and sound gets lost.

Regards

 

[eku60]

Hello MP users,

with the nightly build from 2006-05-21 compression to mpeg2 works fine.

GSpot showed mpv as video and mpa as audio renderer used.

What is left is the only slightly decreased switching time and the stuutering after switching

Regards