Error on Record after wakeup from Suspend (1 Viewer)

[Brudertac]

Area: Media Portal Program
MediaPortal Version: 0.2.1.0 (2006-10-21)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: MPA Decoder Filter
Video Codec: MPV Decoder Filter
CPU Type: AMD Athlon 64 3200+
Memory: 1 GB
Motherboard: MS-6702 (MSI)
TV Card Model: Hauppauge PVR MCE 500
TV Card Type: Hardware
TV Card Driver: 3.1e
Video Card Model: Nvidia Geforce 7600 GS (256 MB)
Video Card Driver: 91.47
Video Card Resolution: 1024x768
Video Render Type: VMR9
Audio Card Model: Creative Audigy Audio Processor (WDM)
Audio Card Driver: unkown - but the latest available

Hi !

- Select a Show from EPG
- Go to HomeScreen
- Wait some Seconds and send MP to Suspend with the Remote
- MP will Wakeup fine and the GUI shows that the Show will be recorded
BUT it isn´t recorded.

Error.log:

27.10.2006 20:35:18 765 [ERROR] mpeg2:FAILED to set streambuffer filename:0x80004005
27.10.2006 20:35:18 812 [ERROR] mpeg2tartRecording() FAILED to create recording


Any Ideas ?

Thanks !

 

[majland]

MediaPortal Version: 0.2.1.0
TV Card Model: Hauppauge Nova-S

Yesteday i made a clean install and is seeing the same thing - but i am not sure it is the same error.

Boot normally - let the system hibernate. I then have problems both if i wake MP up manually and if it does it itself for a scheduled recording.

When waked up manually.
Error.log
29-10-2006 22:37:59 573 [ERROR] Exception :Unable to cast COM object of type 'System.__ComObject' to interface type 'DirectShowLib.BDA.IBDA_SignalStatistics'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{1347D106-CF3A-428A-A5CB-AC0D9A2A4338}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
29-10-2006 22:37:59 583 [ERROR] site :Void UpdateSignalPresent()
29-10-2006 22:37:59 593 [ERROR] source :TVCapture
29-10-2006 22:37:59 593 [ERROR] stacktrace: at MediaPortal.TV.Recording.DVBGraphBDA.UpdateSignalPresent()
at MediaPortal.TV.Recording.DVBGraphBDA.SubmitTuneRequest(DVBChannel ch)
at MediaPortal.TV.Recording.DVBGraphBase.TuneChannel(TVChannel channel)
at MediaPortal.TV.Recording.DVBGraphBase.GrabEpg(TVChannel channel)
at MediaPortal.TV.Recording.TVCaptureDevice.GrabEpg(TVChannel channel)
at MediaPortal.TV.Recording.EPGProcessor.Process(CommandProcessor handler)
at MediaPortal.TV.Recording.CommandProcessor.ProcessThread(Object sender, DoWorkEventArgs e)

dvb-log:
setup pid:22
unable to get IMPEG2PIDMap :0x80004002

Reboot fixes it.

and just closing mp and starting it again also fixes it

 

[Brudertac]

Hm, looks different but the result is exactly the same.

Anyone else with this ?
Personaly i think that 0.2.0.4 was more stable than 0.2.1.0...
The only Problem i had with the old one was that the Remote doesn´t
work correctly after Suspend.

 

[Paranoid Delusion]

Unfortunately for some setups, myself included, powerscheduler causes problems with reinitializing the TV card (usually usb models).

Have run my two cards, which are dual tuners with just the PCI side used and no problems. as soon as i connect the usb bluebird of my Dvico dual, MP does not like it.
Shutting MP down and restarting is enough to fix issue.

Recommend using pvr-scheduler for recording with MP (STSC charges 5 euros to cover site admin, but its worth it).

 

[Brudertac]

Nice Program. I will give it a try. Thanks !