Reply to thread

Message

<blockquote data-quote="vertiche" data-source="post: 123112" data-attributes="member: 45620">MediaPortal Version: 0.2.2Windows Version: XP SP2Motherboard: ASUS A8N-EMotherboard Chipset:Video Card: XFX 7800GT1. TV Card: Hauppauge WinTV PVR 1501. TV Card Type: analog1. TV Card Driver:Remote: Medion X10as i always had problems getting my hauppauge remote working i decided to buy a medion x10 remote. (see link in first post)but, unfortunately, i still don't have a working remote. i installed the drivers suggested in MP setup and selected the proper model in setup as well.an issues may be that the eventviewer integrated in the x10 driver does not display any incoming commands at all. what supports my disbelief in the possibility of the x10 being broken in a hardware meaning is the fact that both - the led on the receiver and the &quot;signal sent indicating light on the remote&quot; are properly working. ok that's kind of a poor evidence but it's the only one i have and after all the remote is new!sidenote: although i reinstalled mp i still can't remove the &quot;use hauppauge remote&quot; tick in setup. don't know if that may be important for solving my problem.thanks for your (expected) help <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite2" alt=";)" title="Wink&nbsp; &nbsp; ;)" loading="lazy" data-shortname=";)" />greetsdomiPS: should i post in the english board as well?</blockquote>

[QUOTE="vertiche, post: 123112, member: 45620"] MediaPortal Version: 0.2.2 Windows Version: XP SP2 Motherboard: ASUS A8N-E Motherboard Chipset: Video Card: XFX 7800GT 1. TV Card: Hauppauge WinTV PVR 150 1. TV Card Type: analog 1. TV Card Driver: Remote: Medion X10 as i always had problems getting my hauppauge remote working i decided to buy a medion x10 remote. (see link in first post) but, unfortunately, i still don't have a working remote. i installed the drivers suggested in MP setup and selected the proper model in setup as well. an issues may be that the eventviewer integrated in the x10 driver does not display any incoming commands at all. what supports my disbelief in the possibility of the x10 being broken in a hardware meaning is the fact that both - the led on the receiver and the "signal sent indicating light on the remote" are properly working. ok that's kind of a poor evidence but it's the only one i have and after all the remote is new! sidenote: although i reinstalled mp i still can't remove the "use hauppauge remote" tick in setup. don't know if that may be important for solving my problem. thanks for your (expected) help ;) greets domi PS: should i post in the english board as well? [/QUOTE]

Verification