Reply to thread

Message

<blockquote data-quote="xallias" data-source="post: 343162" data-attributes="member: 84312">Hello sorry for the delayed response, but I was a little tired of all that searching. I also have my computer re-installed hoping that it would go. This afternoon I put an antenna amplifier between them and this does not help also. I also installed the new media portal, and this does not helped also. I installed mediaportal and the server using the wikiMy cards are valid and I pay just my abbonement. Below are my Everywhere Digital Support Report. What is strange is that sometimes one card is 100% and then the other while I did not change. But it remains the same as I scan in The Netherlands Casema he believes all channels on a cam but only on the channel station is green and the other cam course gives nothing. I do have in the configuration of cams cam enabled the option checked.I hope some one can help me------------------------------------------------------------------------------Digital Everywhere Support Report: v1.1 (2279-0)-------------------------------------------------------------------------------Generated on (Y/M/d): 2008.12.14FireDTV / FloppyDTV devices:-------------------------------------------------------------------------------devices found: 2Status for device 1&nbsp; &nbsp; Model : FloppyDTV C/CI&nbsp; &nbsp; GUID : 0x0012872602002647&nbsp; &nbsp; HW Ver.: 00.00.00&nbsp; &nbsp; FW Ver.: 0.0.0 Build 0&nbsp; &nbsp; Driver : 4.8.1&nbsp; &nbsp; Frontend Status:&nbsp; &nbsp; Frequency.: 205488 kHz, Sig.Str.: 0%, BER: 65526&nbsp; &nbsp; Locked&nbsp;&nbsp; : NO&nbsp; &nbsp; CAM Module: Status for device 2&nbsp; &nbsp; Model : FloppyDTV C/CI&nbsp; &nbsp; GUID : 0x0012872602002306&nbsp; &nbsp; HW Ver.: 01.26.02&nbsp; &nbsp; FW Ver.: 2.4.0 Build 51440&nbsp; &nbsp; Driver : 4.8.1&nbsp; &nbsp; Frontend Status:&nbsp; &nbsp; Frequency.: 388000 kHz, Sig.Str.: 100%, BER: 0&nbsp; &nbsp; Locked&nbsp;&nbsp; : YES&nbsp; &nbsp; CAM Module: AlphaCryptWindows System Information:-------------------------------------------------------------------------------OS Path: C:\WindowsOS Version: &nbsp; Microsoft Windows Vista, Service Pack 1 (Build: 6001)OHCI Controller:&nbsp; Manufacturer: Texas Instruments&nbsp; Description: Texas Instruments OHCI Compliant IEEE 1394 Host ControllerMCE Plugin:-------------------------------------------------------------------------------No Plugin Version found!No Service found!Program files path: 'C:\Program Files'FireDTV Transponder List:-------------------------------------------------------------------------------Transponder List found:CableFireDTV Tools:-------------------------------------------------------------------------------No running FireDTV tools found</blockquote>

[QUOTE="xallias, post: 343162, member: 84312"] Hello sorry for the delayed response, but I was a little tired of all that searching. I also have my computer re-installed hoping that it would go. This afternoon I put an antenna amplifier between them and this does not help also. I also installed the new media portal, and this does not helped also. I installed mediaportal and the server using the wiki My cards are valid and I pay just my abbonement. Below are my Everywhere Digital Support Report. What is strange is that sometimes one card is 100% and then the other while I did not change. But it remains the same as I scan in The Netherlands Casema he believes all channels on a cam but only on the channel station is green and the other cam course gives nothing. I do have in the configuration of cams cam enabled the option checked. I hope some one can help me ------------------------------------------------------------------------------ Digital Everywhere Support Report: v1.1 (2279-0) ------------------------------------------------------------------------------- Generated on (Y/M/d): 2008.12.14 FireDTV / FloppyDTV devices: ------------------------------------------------------------------------------- devices found: 2 Status for device 1 Model : FloppyDTV C/CI GUID : 0x0012872602002647 HW Ver.: 00.00.00 FW Ver.: 0.0.0 Build 0 Driver : 4.8.1 Frontend Status: Frequency.: 205488 kHz, Sig.Str.: 0%, BER: 65526 Locked : NO CAM Module: Status for device 2 Model : FloppyDTV C/CI GUID : 0x0012872602002306 HW Ver.: 01.26.02 FW Ver.: 2.4.0 Build 51440 Driver : 4.8.1 Frontend Status: Frequency.: 388000 kHz, Sig.Str.: 100%, BER: 0 Locked : YES CAM Module: AlphaCrypt Windows System Information: ------------------------------------------------------------------------------- OS Path: C:\Windows OS Version: Microsoft Windows Vista, Service Pack 1 (Build: 6001) OHCI Controller: Manufacturer: Texas Instruments Description: Texas Instruments OHCI Compliant IEEE 1394 Host Controller MCE Plugin: ------------------------------------------------------------------------------- No Plugin Version found! No Service found! Program files path: 'C:\Program Files' FireDTV Transponder List: ------------------------------------------------------------------------------- Transponder List found: Cable FireDTV Tools: ------------------------------------------------------------------------------- No running FireDTV tools found [/QUOTE]

Verification