Germany
TV-Server Version: MyTV standard
MediaPortal Version: 0.2.3.0
MediaPortal Skin: two blue wide
Windows Version: XP Pro , 5.1.2600 Service Pack 3, v.3264 Build 2600
CPU Type: AMD Athlon XP 2500+ ~1826 Mhz
HDD: Hitachi, HDT722525DLA380, 250GB
Memory: 1.024,00 MB
Motherboard: Shuttle SK43V10
Motherboard Chipset:
Motherboard Bios: Phoenix Technologies, LTD 6.00 PG, 17.03.2005
Video Card: NVIDIA GeForce 6600 GT
Video Card Driver: nv4_disp.dll, 6.14.11.6921
Sound Card: Realtek AC'97 Audio for VIA (R) Audio Controller
Sound Card AC3:
Sound Card Driver: alcxwdm.sys (5.10.5720 built by: WinDDK, 2,17 MB (2.278.784 bytes
1. TV Card: Digital Everywhere FireDTV
1. TV Card Type: DVB-S
1. TV Card Driver: FireDTV_BDA_DVBS.sys 4.8.0.0
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
Satelite/CableTV Provider:
HTPC Case: Shuttle
Cooling:
Power Supply:
Remote:
TV: Panasonic 100Hz
TV - HTPC Connection: S-video
I have a prblem finding german channels when scanning Astra 19 degrees east. In particular I am looking for ARD ZDF, etc. I have a multilnb dish with a mulplexer and everything works fine on the same system when using the FIREDTV VIEWER. All desired channels appear in this Viewer but not when using MyTV within MP1.
I the DISEQC settings in the FireDTV viewer and within the MP config are identical.
My Multiplexer defaults to Hotbird if no DiseqC singnal is being send. And to me it appears like this is the case.
I have shrunk down the transponder lists for
hotbird to satname=Hotbird 2/3/6/7A (13°E) 11604,H,27500 which should find ArTE Europe,
and Astra to satname=Astra 1C/1E/1F/1G/1H/2C (19,2°E) 11836,H,27500 which should be ARD etc.
Only 6 channels are being found RAI Africa to RAI Gulp none of the desired once.
I have attached several screen shots as well as the transponder lists in the log.zip showing the settings.
Just scanning astra does not show the desired german channels either . I think this is because of the DiseqC problem , since the multiplexer defaults to LNB1 which is hotbird
I also attached a screenshot of the complete scan 04MitLevelAB...gif showing the result of the complete scan.
488 new channels plus 273 updated is all I get ASTRA & Hotbird.
My system is a brand new install with just an initial 0.2.3.0 MP release.
I have been trying to find a solution for the last week by myself but no sucess. Any help is deeply apreciated.
Infinityloop this is the issue I had mentioned before
MediaPortal Version: 0.2.3.0
MediaPortal Skin: two blue wide
Windows Version: XP Pro , 5.1.2600 Service Pack 3, v.3264 Build 2600
CPU Type: AMD Athlon XP 2500+ ~1826 Mhz
HDD: Hitachi, HDT722525DLA380, 250GB
Memory: 1.024,00 MB
Motherboard: Shuttle SK43V10
Motherboard Chipset:
Motherboard Bios: Phoenix Technologies, LTD 6.00 PG, 17.03.2005
Video Card: NVIDIA GeForce 6600 GT
Video Card Driver: nv4_disp.dll, 6.14.11.6921
Sound Card: Realtek AC'97 Audio for VIA (R) Audio Controller
Sound Card AC3:
Sound Card Driver: alcxwdm.sys (5.10.5720 built by: WinDDK, 2,17 MB (2.278.784 bytes
1. TV Card: Digital Everywhere FireDTV
1. TV Card Type: DVB-S
1. TV Card Driver: FireDTV_BDA_DVBS.sys 4.8.0.0
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
Satelite/CableTV Provider:
HTPC Case: Shuttle
Cooling:
Power Supply:
Remote:
TV: Panasonic 100Hz
TV - HTPC Connection: S-video
I have a prblem finding german channels when scanning Astra 19 degrees east. In particular I am looking for ARD ZDF, etc. I have a multilnb dish with a mulplexer and everything works fine on the same system when using the FIREDTV VIEWER. All desired channels appear in this Viewer but not when using MyTV within MP1.
I the DISEQC settings in the FireDTV viewer and within the MP config are identical.
My Multiplexer defaults to Hotbird if no DiseqC singnal is being send. And to me it appears like this is the case.
I have shrunk down the transponder lists for
hotbird to satname=Hotbird 2/3/6/7A (13°E) 11604,H,27500 which should find ArTE Europe,
and Astra to satname=Astra 1C/1E/1F/1G/1H/2C (19,2°E) 11836,H,27500 which should be ARD etc.
Only 6 channels are being found RAI Africa to RAI Gulp none of the desired once.
I have attached several screen shots as well as the transponder lists in the log.zip showing the settings.
Just scanning astra does not show the desired german channels either . I think this is because of the DiseqC problem , since the multiplexer defaults to LNB1 which is hotbird
I also attached a screenshot of the complete scan 04MitLevelAB...gif showing the result of the complete scan.
488 new channels plus 273 updated is all I get ASTRA & Hotbird.
My system is a brand new install with just an initial 0.2.3.0 MP release.
I have been trying to find a solution for the last week by myself but no sucess. Any help is deeply apreciated.
Infinityloop this is the issue I had mentioned before