Reply to thread

Message

<blockquote data-quote="AberDino" data-source="post: 1301480" data-attributes="member: 11575">Due to ongoing issues with my TBS5520SE USB tuner, I've invested in a Hauppauge WinTV-NOVA-S2 tuner. I have a multi-LNB setup (19.2°E / 23.5°E / 28.2°E) with DiSEqC 1.0 switches (twin LNBs for each).I also had a TBS5980 before, and DiSEqC worked without any issues on both TBS tuners, quickly switching between the various LNBs. Unfortunately, not so with the Hauppauge WinTV-NOVA-S2 tuner, as it only seems to be able to use the LNB connected to port 1 (Level1AA). Tuning to channels on port 2 or 3 is unsuccessful. See log attached, where I tune to the &quot;BVN&quot; channel on 19.2°E (port 2 - Level1AB), first successfully with the TBS5520SE tuner and then unsuccessfully with the WinTV-NOVA-S2 tuner. In order to test the WinTV-NOVA-S2 tuner DiSEqC functionality, I installed the Hauppauge WinTV 10 software and it works fine there, so it appears to be a MediaPortal issue.Is anybody able to assist with this? To be honest, I had expected this tuner to work without any issues, but I have now found some older posts regarding DiSEqC issues with Hauppauge devices. Is it possible to increase the delay after switching to see if that would help?</blockquote>

[QUOTE="AberDino, post: 1301480, member: 11575"] Due to ongoing issues with my TBS5520SE USB tuner, I've invested in a Hauppauge WinTV-NOVA-S2 tuner. I have a multi-LNB setup (19.2°E / 23.5°E / 28.2°E) with DiSEqC 1.0 switches (twin LNBs for each). I also had a TBS5980 before, and DiSEqC worked without any issues on both TBS tuners, quickly switching between the various LNBs. Unfortunately, not so with the Hauppauge WinTV-NOVA-S2 tuner, as it only seems to be able to use the LNB connected to port 1 (Level1AA). Tuning to channels on port 2 or 3 is unsuccessful. See log attached, where I tune to the "BVN" channel on 19.2°E (port 2 - Level1AB), first successfully with the TBS5520SE tuner and then unsuccessfully with the WinTV-NOVA-S2 tuner. In order to test the WinTV-NOVA-S2 tuner DiSEqC functionality, I installed the Hauppauge WinTV 10 software and it works fine there, so it appears to be a MediaPortal issue. Is anybody able to assist with this? To be honest, I had expected this tuner to work without any issues, but I have now found some older posts regarding DiSEqC issues with Hauppauge devices. Is it possible to increase the delay after switching to see if that would help? [/QUOTE]

Verification