Reply to thread

Message

<blockquote data-quote="disaster123" data-source="post: 706027" data-attributes="member: 74707">AW: HELP! DigitalDevices S2 only no discontinues outside the case :-(Hi,i've this one:<a href="http://shop.digital-devices.de/epages/62357162.sf/de_DE/?ObjectPath=/Shops/62357162/Products/091009" target="_blank">DuoFlex S2 miniPCIe - Digital Devices Distribution UG (haftungsbeschränkt)</a>so there is just ONE minipcie card / bridge / controller and the real cards are just connected to the minipcie through an extra cable. So it is just easy to let the card's hang outside the case. But the case signalquality problem is &quot;solved&quot; with the rubber tape. So this one is an additional issue. My case hase an included PSU which i cannot remove / change. It is a chenbro es34069 case:<a href="http://www.chenbro.com/corporatesite/products_detail.php?sku=79" target="_blank">Chenbro Micom Co., Ltd.</a>or some more pictures&nbsp;<a href="http://blog.flowbuzz.com/2008/06/building-thing-nas-project-part-2.html" target="_blank">The Meaning Thereof: Building the *!#&amp;@ thing (The NAS Project, part 2)</a>OK, it takes 20 min without any tuning then i've no signal. When i then try to tune again you can watch the raise of the signal quality from 0 to 80% every 10s or so it get's more and more. In the beginning it starts flapping between 0 and 33 and then it get's higher and higher on tuner1. Then when tuner 1 reaches the max. it starts to raise on tuner2.It takes 10 min then it is full signal again.</blockquote>

[QUOTE="disaster123, post: 706027, member: 74707"] [b]AW: HELP! DigitalDevices S2 only no discontinues outside the case :-([/b] Hi, i've this one: [url=http://shop.digital-devices.de/epages/62357162.sf/de_DE/?ObjectPath=/Shops/62357162/Products/091009]DuoFlex S2 miniPCIe - Digital Devices Distribution UG (haftungsbeschränkt)[/url] so there is just ONE minipcie card / bridge / controller and the real cards are just connected to the minipcie through an extra cable. So it is just easy to let the card's hang outside the case. But the case signalquality problem is "solved" with the rubber tape. So this one is an additional issue. My case hase an included PSU which i cannot remove / change. It is a chenbro es34069 case: [url=http://www.chenbro.com/corporatesite/products_detail.php?sku=79]Chenbro Micom Co., Ltd.[/url] or some more pictures [url=http://blog.flowbuzz.com/2008/06/building-thing-nas-project-part-2.html]The Meaning Thereof: Building the *!#&@ thing (The NAS Project, part 2)[/url] OK, it takes 20 min without any tuning then i've no signal. When i then try to tune again you can watch the raise of the signal quality from 0 to 80% every 10s or so it get's more and more. In the beginning it starts flapping between 0 and 33 and then it get's higher and higher on tuner1. Then when tuner 1 reaches the max. it starts to raise on tuner2. It takes 10 min then it is full signal again. [/QUOTE]

Verification