Finland
TV-Server Version:
MediaPortal Version: 1.1. RC with latest svn
MediaPortal Skin: Blue3
Windows Version: xp sp3
CPU Type: Intel Core 2 Duo E6400
HDD: Seagate 320 & WD 500 GB
Memory: DDR2 2GB
Motherboard: Asus B5P
Video Card: NVidia Gf 8400 GS(G98 new chip)
Video Card Driver: NVidia 185.55
Sound Card: Built-in Realtek 7.1 HD
Sound Card AC3: SPDIF
Sound Card Driver: realtek
1. TV Card: Technotrend S2 3200
1. TV Card Type: DVB-S
1. TV Card Driver: 5.0.1.8
2. TV Card: Pinnacle 70e
2. TV Card Type: DVB-T
2. TV Card Driver: latest
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Cyberlink 9 SD
MPEG2 Audio Codec: ffdshow
h.264 Video Codec: Cyberlink 9 HD
Satelite/CableTV Provider: Thor 1w
HTPC Case: Antec fusion black
Cooling:
Power Supply:
Remote: Technotrend 3200
TV: Philips pfp 5532D 42"
TV - HTPC Connection: DVI
Hi.
I had one LNB in my system previously and Thor channels were scanned with only one lnb installed., now i got another lnb from a friend and i just put it into right position. Well in TvSetup i configured original lnb to use SimpleA for line one with Diseqc and new lnb for SimpleB. I then scanned channels for Astra 1(19.2) and channels were found, but i cannot tune to line one(thor) anymore. Mp says No signal.
Well then i decided to to scan channels for both and all channels were found from both Lnb1 and 2, so conclusion is that Diseqc works when scanning channels.
When i try to watch some channel in lnb1(thor), result is No signal, but in Lnb 2 i can watch channels. So i guess diseqc is not working. How is Diseqc information stored in Channel table in Db ??.
Any help would be appreciated.
UPDATE:
Works now. For some reason full rescan did not update diseqc data in tuningdetails table. Manually updated table mader it work.
MediaPortal Version: 1.1. RC with latest svn
MediaPortal Skin: Blue3
Windows Version: xp sp3
CPU Type: Intel Core 2 Duo E6400
HDD: Seagate 320 & WD 500 GB
Memory: DDR2 2GB
Motherboard: Asus B5P
Video Card: NVidia Gf 8400 GS(G98 new chip)
Video Card Driver: NVidia 185.55
Sound Card: Built-in Realtek 7.1 HD
Sound Card AC3: SPDIF
Sound Card Driver: realtek
1. TV Card: Technotrend S2 3200
1. TV Card Type: DVB-S
1. TV Card Driver: 5.0.1.8
2. TV Card: Pinnacle 70e
2. TV Card Type: DVB-T
2. TV Card Driver: latest
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Cyberlink 9 SD
MPEG2 Audio Codec: ffdshow
h.264 Video Codec: Cyberlink 9 HD
Satelite/CableTV Provider: Thor 1w
HTPC Case: Antec fusion black
Cooling:
Power Supply:
Remote: Technotrend 3200
TV: Philips pfp 5532D 42"
TV - HTPC Connection: DVI
Hi.
I had one LNB in my system previously and Thor channels were scanned with only one lnb installed., now i got another lnb from a friend and i just put it into right position. Well in TvSetup i configured original lnb to use SimpleA for line one with Diseqc and new lnb for SimpleB. I then scanned channels for Astra 1(19.2) and channels were found, but i cannot tune to line one(thor) anymore. Mp says No signal.
Well then i decided to to scan channels for both and all channels were found from both Lnb1 and 2, so conclusion is that Diseqc works when scanning channels.
When i try to watch some channel in lnb1(thor), result is No signal, but in Lnb 2 i can watch channels. So i guess diseqc is not working. How is Diseqc information stored in Channel table in Db ??.
Any help would be appreciated.
UPDATE:
Works now. For some reason full rescan did not update diseqc data in tuningdetails table. Manually updated table mader it work.