Reply to thread

Message: <blockquote data-quote="tourettes" data-source="post: 40542" data-attributes="member: 10858">Here are the (short) build instructions for the DVB subtitle filter: 1. Make sure that you are able to compile MediaPortal MPSA filter in CVS. Following forum thread should be able to quide you: <a href="https://forum.team-mediaportal.com/viewtopic.php?t=12101&highlight=mpsa" target="_blank">https://forum.team-mediaportal.com/viewtopic.php?t=12101&highlight=mpsa</a> 2. After MPSA can be compile, you should be able to compile DVB filter without problems. 3. For testing the filter you'll need a TS stream that contains all PIDs for one channel that has DVB subtitles. This can be recorded at least with TSReader (full version) or maybe with MyTheatre. 4. To build a graph in Graph edit youl'll need to use either MediaPortal's TS source (MPTS.ax) or TSFileSource (<a href="http://forums.dvbowners.com/index.php?showtopic=4465" target="_blank">http://forums.dvbowners.com/index.php?showtopic=4465</a>). 5. Graph should be looking almost like this -> <a href="http://day2.no-ip.org/pictures/graph.png" target="_blank">http://day2.no-ip.org/pictures/graph.png</a>. There is currently one more pin connection between MS demuxer and the subtitle filter. 6. Pins in Subtitle filter - Video input pin ( decoded video stream as UYVY or YUV2 format) - Audio input pin takes complete audio TS stream - subtitle input pin takes subtitpe PID TS payload - output pin outputs UYVY or YUV2 video stream to VMR9 / overlay renderer 7. in source code there is hard coded PID number for channels subtitle PID - m_pSubtitlePin->SetSubtitlePID( 0x403 ); change that for correct value Hopefully I didn't miss much information, but I'm currently a little bit busy and not at home, so I couldn't check all those details. Let me know how the building / testing works or if you have some issues and I'll try to help with those.</blockquote>

Verification