Sweden
TV-Server Version: 0.3
MediaPortal Version: 0.2.3.0
MediaPortal Skin: Standard
Windows Version: Win XP sp2
CPU Type: AMD Athlon 64 X2 5200+
HDD: Seagate Barracuda 7200.10 ST3320620AS 16MB 320GB
Memory: Corsair XMS2 Xtreme TwinX DDR2 PC6400/800MHz CL5 2x1GB
Motherboard: Msi K9AGM2-FIH
Motherboard Chipset: AMD 690G
Motherboard Bios:
Video Card: Msi GeForce NX7300GS-MD256EH-HD 256MB
Video Card Driver: Latest...
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card: Digital Everywhere FireDTV C-CI
1. TV Card Type: DVB-C
1. TV Card Driver: BDA 4.8
MPEG2 Video Codec: ?
MPEG2 Audio Codec: ?
Satelite/CableTV Provider:
HTPC Case: Antec NSK2400
Cooling: Thermalright SI-128, Noctua fans
Power Supply: Silverstone Nightjar ST30NF 300W
Remote: Digital Everywhere FireDTV-remote
TV: LG 42PM1M
TV - HTPC Connection: HDMI
I have seen this problem from several others (similar at least, I think) I get the same error message anyway...
"Warning: Nothing will be rendered. The reference rendering device was selected, but your computer only has a reduced-functionality reference device installed. Please check if your graphics card and drivers meet the minimum system requirements. A software device that implements the entire Direct3D feature set, but runs very slowly"
Then the problem is as follows. I can at times get some TV signal but can only view TV in the small windows, if I change to a full screen it turns black... no tv image.
I have read about this or similar problems in the forum and checked that my graphics card hardware acceleration is turned on... I have installed all the drivers I could find for the card one by one but have had no change to this problem...
MediaPortal Version: 0.2.3.0
MediaPortal Skin: Standard
Windows Version: Win XP sp2
CPU Type: AMD Athlon 64 X2 5200+
HDD: Seagate Barracuda 7200.10 ST3320620AS 16MB 320GB
Memory: Corsair XMS2 Xtreme TwinX DDR2 PC6400/800MHz CL5 2x1GB
Motherboard: Msi K9AGM2-FIH
Motherboard Chipset: AMD 690G
Motherboard Bios:
Video Card: Msi GeForce NX7300GS-MD256EH-HD 256MB
Video Card Driver: Latest...
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card: Digital Everywhere FireDTV C-CI
1. TV Card Type: DVB-C
1. TV Card Driver: BDA 4.8
MPEG2 Video Codec: ?
MPEG2 Audio Codec: ?
Satelite/CableTV Provider:
HTPC Case: Antec NSK2400
Cooling: Thermalright SI-128, Noctua fans
Power Supply: Silverstone Nightjar ST30NF 300W
Remote: Digital Everywhere FireDTV-remote
TV: LG 42PM1M
TV - HTPC Connection: HDMI
I have seen this problem from several others (similar at least, I think) I get the same error message anyway...
"Warning: Nothing will be rendered. The reference rendering device was selected, but your computer only has a reduced-functionality reference device installed. Please check if your graphics card and drivers meet the minimum system requirements. A software device that implements the entire Direct3D feature set, but runs very slowly"
Then the problem is as follows. I can at times get some TV signal but can only view TV in the small windows, if I change to a full screen it turns black... no tv image.
I have read about this or similar problems in the forum and checked that my graphics card hardware acceleration is turned on... I have installed all the drivers I could find for the card one by one but have had no change to this problem...
