Reply to thread

Message

<blockquote data-quote="gregpeters" data-source="post: 658474" data-attributes="member: 81349">Solved: HTPC doesn't hibernate eventhough PowerScheduler being activeMany thanks to all. It is working now!!!(by the way, where can I indicate in this thread that the issue has been solved? By using the thumbs up symbol?)I'm not sure what the problem really was but it seems that it was related to Windows XP rather than MP.I didn't change anything in MP nor the TV server configuration. The only thing I changed is the following (please note that I've a German Windows XP, meaning that the following might actually be spelled differently on an English Win XP):1) I went into the Windows Hardware Manager on my machine2) I don't know why but there are quite a lot of different HI devices installed on my machine (I always assumed that this is due to my fake X10 remote but this can't explain the whole story. On a side note: as you can see in the pic, I disabled some HIDs. I did this to prevent inputs on the remote to be repeated for a second time (i.e. every stroke on my remote had been repeated once. Disabling some HID resolved this issue)<img src="https://forum.team-mediaportal.com/attachment.php?attachmentid=68259&amp;stc=1&amp;d=1284890633" alt="" class="fr-fic fr-dii fr-draggable " style="" />3) I looked through all HIDs, and some have a &quot;Power Saving/control tab&quot; (in German: Energieverwaltung)4) I checked a function that reads out like &quot;allow device to activate computer from standby mode&quot; ( In German: Gerät kann den Computer aus dem Standbymodus aktivieren&quot;). 5 ) I repeated step 4 on all HIDs with a &quot;Power Saving/control tab&quot;As I haven't done any other changes to my machine, I assume that this was the trick. I don't really understand it, though, because my problem was to get my computer into hibernate and not to activate from hibernation.I haven't tried to schedule a recording yet. However, I can confirm that the htpc enters hibernation as supposed, wakes up at 6 am for grabbing WebEPG, and subsequently hibernates again.Cheers,Greg</blockquote>

[QUOTE="gregpeters, post: 658474, member: 81349"] [b]Solved: HTPC doesn't hibernate eventhough PowerScheduler being active[/b] Many thanks to all. It is working now!!! (by the way, where can I indicate in this thread that the issue has been solved? By using the thumbs up symbol?) I'm not sure what the problem really was but it seems that it was related to Windows XP rather than MP. I didn't change anything in MP nor the TV server configuration. The only thing I changed is the following (please note that I've a German Windows XP, meaning that the following might actually be spelled differently on an English Win XP): 1) I went into the Windows Hardware Manager on my machine 2) I don't know why but there are quite a lot of different HI devices installed on my machine (I always assumed that this is due to my fake X10 remote but this can't explain the whole story. On a side note: as you can see in the pic, I disabled some HIDs. I did this to prevent inputs on the remote to be repeated for a second time (i.e. every stroke on my remote had been repeated once. Disabling some HID resolved this issue) [IMG]https://forum.team-mediaportal.com/attachment.php?attachmentid=68259&stc=1&d=1284890633[/IMG] 3) I looked through all HIDs, and some have a "Power Saving/control tab" (in German: Energieverwaltung) 4) I checked a function that reads out like "allow device to activate computer from standby mode" ( In German: Gerät kann den Computer aus dem Standbymodus aktivieren"). 5 ) I repeated step 4 on all HIDs with a "Power Saving/control tab" As I haven't done any other changes to my machine, I assume that this was the trick. I don't really understand it, though, because my problem was to get my computer into hibernate and not to activate from hibernation. I haven't tried to schedule a recording yet. However, I can confirm that the htpc enters hibernation as supposed, wakes up at 6 am for grabbing WebEPG, and subsequently hibernates again. Cheers, Greg [/QUOTE]

Verification