HVR-1300 Vista/Windows 7 - No signal (1 Viewer)

[prozacdk]

Hi,

I seem to have run into a wall, with a little issue I have.

My old MediaCenter runs on Windows XP SP3 and I use a Hauppauge HVR-1300 DVB-T card, this works perfect.

Unfortunally I cant get the hvr-1300 to work on my new mediacenter. I have tried the drivers that I use on the old, and the newest from hauppauge. I keep getting no-signal when scanning for channels.

I have tried both Vista SP1 and SP2 and Windows 7 RTM, same issue.

I have tried 1.1.0 Alpha/Beta1 and 1.0.2 stable

Anyone got a clue whats wrong?

from error.log (1.1.0 Beta1/Windows 7):
2009-08-29 22:07:22.076047 [6]: dvb: Render->main inftee demux failed
2009-08-29 22:07:22.091647 [6]: Exception :TvLibrary.TvException: No Tv Receiver filter found
ved TvLibrary.Implementations.DVB.TvCardDvbBase.AddAndConnectBDABoardFilters(DsDevice device)
ved TvLibrary.Implementations.DVB.TvCardDVBT.BuildGraph()

2009-08-29 22:07:22.107247 [6]: Exception :TvLibrary.TvExceptionGraphBuildingFailed: Graph building failed ---> TvLibrary.TvException: No Tv Receiver filter found
ved TvLibrary.Implementations.DVB.TvCardDvbBase.AddAndConnectBDABoardFilters(DsDevice device)
ved TvLibrary.Implementations.DVB.TvCardDVBT.BuildGraph()

from tv.log (1.1.0 Beta1/Windows 7):
2009-08-29 22:51:56.138181 [10]: dvbt: TuneVBT:tv: Freq:834000 ONID:-1 TSID:-1 SID:-1 PMT:0xFFFFFFFF FTA:False LCN:10000 BandWidth:8
2009-08-29 22:51:56.138181 [10]: dvbt: tune: Assigning oldChannel
2009-08-29 22:51:56.138181 [10]: dvbt: tune: Current channel is null
2009-08-29 22:51:56.138181 [10]: dvbt: tune: Building graph
2009-08-29 22:51:56.138181 [10]: BuildGraph
2009-08-29 22:51:56.138181 [10]: dvb:AddNetworkProviderFilter
2009-08-29 22:51:56.153781 [10]: dvb:Add Generic Network Provider
2009-08-29 22:51:56.153781 [10]: CreateTuningSpace()
2009-08-29 22:51:56.153781 [10]: Found tuningspace Antenna
2009-08-29 22:51:56.153781 [10]: Found tuningspace ATSC
2009-08-29 22:51:56.153781 [10]: Found tuningspace ATSCCable
2009-08-29 22:51:56.153781 [10]: Found tuningspace AuxIn1
2009-08-29 22:51:56.153781 [10]: Found tuningspace Cable
2009-08-29 22:51:56.153781 [10]: Found tuningspace ClearQAM
2009-08-29 22:51:56.153781 [10]: Found tuningspace Digital Cable
2009-08-29 22:51:56.153781 [10]: Found tuningspace DVB-S
2009-08-29 22:51:56.169381 [10]: Found tuningspace DVB-T
2009-08-29 22:51:56.169381 [10]: Found tuningspace DVBT TuningSpace
2009-08-29 22:51:56.169381 [10]: Found correct tuningspace DVBT TuningSpace
2009-08-29 22:51:56.169381 [10]: dvb:Add MPEG2 Demultiplexer filter
2009-08-29 22:51:56.169381 [10]: dvb:add Inf Tee filter
2009-08-29 22:51:56.169381 [10]: dvb:AddAndConnectBDABoardFilters
2009-08-29 22:51:56.169381 [10]: dvb: find bda tuner
2009-08-29 22:51:56.200581 [10]: dvb: using [Tuner]: Hauppauge WinTV 88x DVB-T Tuner/Demod
2009-08-29 22:51:56.200581 [10]: dvb: Render [Network provider]->[Tuner] OK
2009-08-29 22:51:56.200581 [10]: dvb: Find BDA receiver
2009-08-29 22:51:56.200581 [10]: dvb: match Capture by Tuner device path
2009-08-29 22:51:56.200581 [10]: dvb: -Hauppauge WinTV 88x TS Capture
2009-08-29 22:51:56.231781 [10]: dvb: Looking for another bda receiver...
2009-08-29 22:51:56.231781 [10]: dvb: Match by device path failed - trying alternative method
2009-08-29 22:51:56.231781 [10]: dvb: match Capture filter by Tuner device connection
2009-08-29 22:51:56.231781 [10]: dvb: -Hauppauge WinTV 88x TS Capture
2009-08-29 22:51:56.278582 [10]: dvb: Looking for another bda receiver...
2009-08-29 22:51:56.278582 [10]: dvb: Single BDA filter implementation...
2009-08-29 22:51:56.278582 [10]: dvb: WinTv CI module not detected.
2009-08-29 22:51:56.278582 [10]: dvb: Render [tuner]->[inftee]
2009-08-29 22:51:56.294182 [10]: dvbecompose
2009-08-29 22:51:56.294182 [10]: tvcard:FreeAllSubChannels:
2009-08-29 22:51:56.294182 [10]: stop
2009-08-29 22:51:56.294182 [10]: remove all filters
2009-08-29 22:51:56.294182 [10]: free...
2009-08-29 22:51:56.294182 [10]: free pins...
2009-08-29 22:51:56.294182 [10]: !!! Error releasing TSWriter filter (_filterTsWriter as IBaseFilter was null!)
2009-08-29 22:51:56.294182 [10]: free graph...
2009-08-29 22:51:56.294182 [10]: free devices...
2009-08-29 22:51:56.309782 [10]: decompose done...
2009-08-29 22:51:56.309782 [10]: Stopcard
2009-08-29 22:51:56.309782 [10]: dvbtopGraph called
2009-08-29 22:51:56.309782 [10]: tvcard:FreeAllSubChannels:
2009-08-29 22:51:56.309782 [10]: Controller: epg start
2009-08-29 22:52:01.410991 [10]: Controller: epg start

The above entries in both logs repeat for each channel scan.

Hope some one can help.

Kind Regards
Martin

 

[50chickens]

i can't really help, but i have this same combo - hvr-1300 & win7 x64 and i can do analog and digital no problems..

my hauppauge driver date is 25/02/2009 version 2.123.27056.0 and i'm using mp 1.1 beta1 and also the svn snapshots..

 

[prozacdk]

Hmm thats weird, maybe it have some thing to do with codecs? can you give me a summary of how you installed it, both driver and codec and MP?

Kind Regards
Martin

 

[50chickens]

yeah this is the process i used -

install win7
install drivers for huappauge hvr-1300 (this is both the windows drivers and the mce software - Hauppauge Computer Works Ltd : Product Support)
and then mp 1.1.0 beta
then i configure the tvserver.

thats basically my process. you might try and run the drive uninstall utility (sorry i can't remember what it is called) and then reinstall the latest version of the driver software..