New Zealand
TV-Server Version: RC2 SVN 11-07-08
MediaPortal Version: RC2
MediaPortal Skin: Blue two wide
Windows Version: XP SP2
CPU Type: Duo core Intel
HDD: 200G
Memory: 2G
Motherboard: Asus
Video Card: 8500GT no fan
Video Card Driver: Forecware 175.19
Sound Card: On board SPDIF out Realtek HD
Sound Card AC3: "
Sound Card Driver: 5.10.0.5391
1. TV Card: HVR2200
1. TV Card Type:
1. TV Card Driver: 7.2.9.26105
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: MPV
MPEG2 Audio Codec:
h.264 Video Codec: Cyberlink PDVD7
Satelite/CableTV Provider:
HTPC Case: Silverstone Grandia 01
Cooling: Multiple fans
Power Supply: 500W
Remote: MCE
TV: Pansonic 42" Plasma
TV - HTPC Connection: RGB vga connector
Having setup MP before I had an tuner card was relatively simple and stable but after the 2200 I have had lots of problems and stability issues.
I couldn't get analogue scanning on the 2200 to pick up Prime or Triangle in New Zealand so I did that manually today which worked. I had to enter manual frequencies though as the TV server did not find the channels when I just entered the channel numbers.
So I have digital and analogue working at the same time. But there seems to be a bug in MP. If you set MP to start TV automatically when you go to MY TV I can only select channels similar to the last used channel. If the last channel selected was digital then selecting another digital is fine but selecting an analogue gives a blue screen and "unable to start time shifting". The same applies if the last used was analogue. Select another analogue and its fine but select a digital and you get the time shifting error and a blue screen. I have applied the timeshift error patch file and am running: MP RC2 / SVN 07-11-2008 / 2200 driver 7.2.9.26105
So seems to be a problem with MP and or MP server but not sure which.
Cheers
Andy
MediaPortal Version: RC2
MediaPortal Skin: Blue two wide
Windows Version: XP SP2
CPU Type: Duo core Intel
HDD: 200G
Memory: 2G
Motherboard: Asus
Video Card: 8500GT no fan
Video Card Driver: Forecware 175.19
Sound Card: On board SPDIF out Realtek HD
Sound Card AC3: "
Sound Card Driver: 5.10.0.5391
1. TV Card: HVR2200
1. TV Card Type:
1. TV Card Driver: 7.2.9.26105
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: MPV
MPEG2 Audio Codec:
h.264 Video Codec: Cyberlink PDVD7
Satelite/CableTV Provider:
HTPC Case: Silverstone Grandia 01
Cooling: Multiple fans
Power Supply: 500W
Remote: MCE
TV: Pansonic 42" Plasma
TV - HTPC Connection: RGB vga connector
Having setup MP before I had an tuner card was relatively simple and stable but after the 2200 I have had lots of problems and stability issues.
I couldn't get analogue scanning on the 2200 to pick up Prime or Triangle in New Zealand so I did that manually today which worked. I had to enter manual frequencies though as the TV server did not find the channels when I just entered the channel numbers.
So I have digital and analogue working at the same time. But there seems to be a bug in MP. If you set MP to start TV automatically when you go to MY TV I can only select channels similar to the last used channel. If the last channel selected was digital then selecting another digital is fine but selecting an analogue gives a blue screen and "unable to start time shifting". The same applies if the last used was analogue. Select another analogue and its fine but select a digital and you get the time shifting error and a blue screen. I have applied the timeshift error patch file and am running: MP RC2 / SVN 07-11-2008 / 2200 driver 7.2.9.26105
So seems to be a problem with MP and or MP server but not sure which.
Cheers
Andy