- December 1, 2008
- 237
- 21
- Home Country
-
Russian Federation
MediaPortal Version: 1.1.RC1
MediaPortal Skin: Blue-3
Windows Version: WinXP-SP3
CPU Type: Intel Core 2 Duo E8400 3.0GHz
HDD: WD 1000Gb
Memory: 2x1024 DDR2
Motherboard: ASUS P5K premium
Video Card: ASUS EN9600GT Silent/HTDI 512
Video Card Driver: 196.21
Sound Card: internal
MPEG2 Video Codec: Cyberlink Video/SP Decoder (PDVD 8)
MPEG2 Audio Codec: ffdshow
h.264 Video Codec: MPC decoder
HTPC Case: Silverstone CW03
Power Supply: Corsair VX450W
Remote: Soundgraph
TV: Pioneer PDP-5080XA
TV - HTPC Connection: DVI-HDMI
I checked "Knockin' On Heaven's Door" movie
Same behaviour is with all my mkv-files containing both TrueHD & AC3 tracks.
MediaInfo of "Knockin' On Heaven's Door\Knockin' On Heaven's Door":
So, there are:
- two AC3 5.1 tracks
- one Dolby TrueHD 5.1 track
- one DTS-HD MA 5.1 track
In MPC-HC it is played perfectly.
In MediaPortal I cannot get AC3 5.1 tracks sometimes.
Let's consider 3 scenarios:
1) Case #1:
- start movie
- select any track (except Dolby TrueHD)
- next select any AC3 5.1 track - it is played OK
2) Case #2:
- start movie
- select Dolby TrueHD track
- next select any AC3 5.1 track - it is NOT played (means NO SOUND)
Logs for this case are attached.
3) Case #3:
- start movie
- select any AC3 5.1 track
- next select Dolby TrueHD track
- next select any AC3 5.1 track - it is NOT played
Logs for this case are attached.
In cases ## 2, 3 (but not logged): if next I select again Dolby TrueHD track (i.e. after failed choice of AC3) - this TrueHD track is played OK. AC3 track will be played only after restart of the movie's playback.
Seems that AC3 5.1 cannot be played after DolbyTrueHD.
GraphEdit picture is provided (click to expand):
After each change of audiotrack I also checked info from Haali Splitter; below is an example (click to expand):
So, adiotrack is REALLY switched 'cause it was seen in Haali's context menu.
MediaPortal Skin: Blue-3
Windows Version: WinXP-SP3
CPU Type: Intel Core 2 Duo E8400 3.0GHz
HDD: WD 1000Gb
Memory: 2x1024 DDR2
Motherboard: ASUS P5K premium
Video Card: ASUS EN9600GT Silent/HTDI 512
Video Card Driver: 196.21
Sound Card: internal
MPEG2 Video Codec: Cyberlink Video/SP Decoder (PDVD 8)
MPEG2 Audio Codec: ffdshow
h.264 Video Codec: MPC decoder
HTPC Case: Silverstone CW03
Power Supply: Corsair VX450W
Remote: Soundgraph
TV: Pioneer PDP-5080XA
TV - HTPC Connection: DVI-HDMI
I checked "Knockin' On Heaven's Door" movie
Same behaviour is with all my mkv-files containing both TrueHD & AC3 tracks.
MediaInfo of "Knockin' On Heaven's Door\Knockin' On Heaven's Door":
Code:
General
Complete name : E:\Video\Movies\Knockin' On Heaven's Door\Knockin' On Heaven's Door.mkv
Format : Matroska
File size : 21.0 GiB
Duration : 1h 28mn
Overall bit rate : 33.8 Mbps
Encoded date : UTC 2009-11-28 21:08:14
Writing application : mkvmerge v2.9.8 ('C'est le bon') built on Aug 13 2009 12:49:06
Writing library : libebml v0.7.7 + libmatroska v0.8.1
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.1
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Muxing mode : Container profile=Unknown@0.0
Codec ID : V_MPEG4/ISO/AVC
Duration : 1h 28mn
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 23.976 fps
Resolution : 8 bits
Colorimetry : 4:2:0
Scan type : Progressive
Language : English
Color primaries : BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
Transfer characteristics : BT.709-5, BT.1361
Matrix coefficients : BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177
Audio #1
ID : 2
Format : DTS
Format/Info : Digital Theater Systems
Format profile : MA
Codec ID : A_DTS
Duration : 1h 28mn
Bit rate mode : Variable
Channel(s) : 6 channels
Channel positions : Front: L C R, Surround: L R, LFE
Sampling rate : 48.0 KHz
Resolution : 16 bits
Title : Voiceover DTS-HD 6ch
Language : Russian
Audio #2
ID : 3
Format : AC-3
Format/Info : Audio Coding 3
Codec ID : A_AC3
Duration : 1h 28mn
Bit rate mode : Constant
Bit rate : 640 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Surround: L R, LFE
Sampling rate : 48.0 KHz
Stream size : 407 MiB (2%)
Title : Voiceover DD 6ch
Language : Russian
Audio #3
ID : 4
Format : AC-3
Format/Info : Audio Coding 3
Codec ID : A_AC3
Duration : 1h 28mn
Bit rate mode : Constant
Bit rate : 384 Kbps
Channel(s) : 2 channels
Channel positions : L R
Sampling rate : 48.0 KHz
Stream size : 244 MiB (1%)
Title : Dubbed DD 2ch
Language : Russian
Audio #4
ID : 5
Format : TrueHD
Codec ID : A_TRUEHD
Codec ID/Info : Dolby TrueHD
Duration : 1h 28mn
Channel(s) : 6 channels
Sampling rate : 48.0 KHz
Title : German TrueHD 6ch
Language : German
Audio #5
ID : 6
Format : AC-3
Format/Info : Audio Coding 3
Codec ID : A_AC3
Duration : 1h 28mn
Bit rate mode : Constant
Bit rate : 640 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Surround: L R, LFE
Sampling rate : 48.0 KHz
Stream size : 407 MiB (2%)
Title : German DD 6ch
Language : German
Text #1
ID : 7
Format : UTF-8
Codec ID : S_TEXT/UTF8
Codec ID/Info : UTF-8 Plain Text
Title : CP Digital
Language : Russian
Text #2
ID : 8
Format : UTF-8
Codec ID : S_TEXT/UTF8
Codec ID/Info : UTF-8 Plain Text
Title : Tivionika
Language : Russian
Text #3
ID : 9
Format : UTF-8
Codec ID : S_TEXT/UTF8
Codec ID/Info : UTF-8 Plain Text
Language : German
- two AC3 5.1 tracks
- one Dolby TrueHD 5.1 track
- one DTS-HD MA 5.1 track
In MPC-HC it is played perfectly.
In MediaPortal I cannot get AC3 5.1 tracks sometimes.
Let's consider 3 scenarios:
1) Case #1:
- start movie
- select any track (except Dolby TrueHD)
- next select any AC3 5.1 track - it is played OK
2) Case #2:
- start movie
- select Dolby TrueHD track
- next select any AC3 5.1 track - it is NOT played (means NO SOUND)
Logs for this case are attached.
3) Case #3:
- start movie
- select any AC3 5.1 track
- next select Dolby TrueHD track
- next select any AC3 5.1 track - it is NOT played
Logs for this case are attached.
In cases ## 2, 3 (but not logged): if next I select again Dolby TrueHD track (i.e. after failed choice of AC3) - this TrueHD track is played OK. AC3 track will be played only after restart of the movie's playback.
Seems that AC3 5.1 cannot be played after DolbyTrueHD.
GraphEdit picture is provided (click to expand):

After each change of audiotrack I also checked info from Haali Splitter; below is an example (click to expand):

So, adiotrack is REALLY switched 'cause it was seen in Haali's context menu.