Hi,
after reading in this form for hours, its time to start a new thread.
I installed MP 1.1.3 from scratch. Everything is working fine. I have mapped my encrypted channels to the KNC which has the ci attached. The other channels are mapped to the TBS.
When I zap only between the encrypted channels, everything is ok. But when I switch to a channel on the TBS and I try to go back to an encrypted Channel on the KNC, I got the "unable to create graph".
When I take a look into the TVServerlog I can see that the CI modul is not recognized anymore. -> KNC: IsCAMReady False
I tried several things, from removing reinserting the cam... nothing works. The only thing I can do, is to restart tv-service. Then everything is ok, until switching from knc to the other card.
For test, I switched back to 1.1.0 RC2.... and... everything works! So I tried to go to RC4, and there I have the same problem as with mp 1.1.3. So there must be an change between rc2 and rc4 which causes this problem for me.
I tried also different cams, no results.
Any ideas?
Thanks in advance
MediaPortal Version: 1.1.3
MediaPortal Skin: Blue Wide
Windows Version: Windows 7 32-Bit
CPU Type: AMD Phenom II X4 810
HDD: 2 * 750 GB Hitachi
Memory: 4 GB
Motherboard: Gigabyte GA-MA785GT-UD3H
Video Card: Onboard ATI HD4200
Video Card Driver: Catalyst 11.2
Sound Card: Onboard
Sound Card AC3:
Sound Card Driver:
1. TV Card: KNC One TV-Station DVB-S2
1. TV Card Type: DVB-S
1. TV Card Driver: 2.1.1130
2. TV Card: TBS 6981 Dual DVB-S2
2. TV Card Type: DVB-S
2. TV Card Driver: 2.0.0.14
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: K-Lite Pack
MPEG2 Audio Codec: K-Lite Pack
h.264 Video Codec: Coreavc 2.0
Satelite/CableTV Provider: Astra 19.2
HTPC Case: Antec Remote Fusion Max
Cooling: Zipang 2
Power Supply: Seasonic S12
Remote: Antec - Veris RM200
TV: Sony KDL-40S5500
TV - HTPC Connection: HDMI
after reading in this form for hours, its time to start a new thread.
I installed MP 1.1.3 from scratch. Everything is working fine. I have mapped my encrypted channels to the KNC which has the ci attached. The other channels are mapped to the TBS.
When I zap only between the encrypted channels, everything is ok. But when I switch to a channel on the TBS and I try to go back to an encrypted Channel on the KNC, I got the "unable to create graph".
When I take a look into the TVServerlog I can see that the CI modul is not recognized anymore. -> KNC: IsCAMReady False
I tried several things, from removing reinserting the cam... nothing works. The only thing I can do, is to restart tv-service. Then everything is ok, until switching from knc to the other card.
For test, I switched back to 1.1.0 RC2.... and... everything works! So I tried to go to RC4, and there I have the same problem as with mp 1.1.3. So there must be an change between rc2 and rc4 which causes this problem for me.
I tried also different cams, no results.
Any ideas?
Thanks in advance
MediaPortal Version: 1.1.3
MediaPortal Skin: Blue Wide
Windows Version: Windows 7 32-Bit
CPU Type: AMD Phenom II X4 810
HDD: 2 * 750 GB Hitachi
Memory: 4 GB
Motherboard: Gigabyte GA-MA785GT-UD3H
Video Card: Onboard ATI HD4200
Video Card Driver: Catalyst 11.2
Sound Card: Onboard
Sound Card AC3:
Sound Card Driver:
1. TV Card: KNC One TV-Station DVB-S2
1. TV Card Type: DVB-S
1. TV Card Driver: 2.1.1130
2. TV Card: TBS 6981 Dual DVB-S2
2. TV Card Type: DVB-S
2. TV Card Driver: 2.0.0.14
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: K-Lite Pack
MPEG2 Audio Codec: K-Lite Pack
h.264 Video Codec: Coreavc 2.0
Satelite/CableTV Provider: Astra 19.2
HTPC Case: Antec Remote Fusion Max
Cooling: Zipang 2
Power Supply: Seasonic S12
Remote: Antec - Veris RM200
TV: Sony KDL-40S5500
TV - HTPC Connection: HDMI