KNC1 dvb-s (Mystic SX dvb-s) low signal level/quality (1 Viewer)

bluebear

Portal Pro
September 19, 2008
75
2
Hi!

I bought a Mystique DVB-S SX (Identic to KNC1 DVB-S TV station) model to supplement my floppydtvS2 card.
My problem is that I get low signal readings, level 30-40% and Quality 60-70%. Naturally I have severe tearing and no picture at all. My floppydtvS2 have 86/86 for level and quality and no tearing. So I should be able to rule out any cable/disec/lnb thing. But I have tried without disec to, same result.

Tried different drivers from: Mystique 2.0.1016.0 XP/Vista
and KNC1 2.1.202.0 XP/Vista

No change.

Verified the readings in Progdvb, as i thought that they were incorrect in Mediaportal. Alas they were not, they were the same.

Bought a Tevii S464 as i thought this card was broken. Works well, but signal level/quality is not as good as the floppydtvS2 card, around 60/80.

So my questions is, has anyone had similar experiences with these cards as I have?
 

Users who are viewing this thread

Top Bottom