Full MCE2004 Remote support please! Button config option (option to disable volume control, system volume step size)? Blaster support (volume on external device, on/off button config w/macro option? (to turn on/off tv...))
Regards
Regards
MCE Remote (2 Viewers)
- Thread starter Autoper
- Start date
I'd like to have this features too.
I've a MCE 2005 (with colored buttons) remote.
I've a MCE 2005 (with colored buttons) remote.
- Thread starter
- #5
I got myself a 2005 remote two weeks ago 
Way to go Autoper
If you experiment with HIP it will let you configure all the buttons as well as program the blasters to control any other ir equipment.
I haven't tried this yet myself, as I am quite happy with the default combinations and being able to learn volume and power commands is enough for me.
I guess once I have MP working as I want then I will experiemnt with that, but at this stage there are always new and cool features to implement before I get to that.
Next step is voice control
If you experiment with HIP it will let you configure all the buttons as well as program the blasters to control any other ir equipment.
I haven't tried this yet myself, as I am quite happy with the default combinations and being able to learn volume and power commands is enough for me.
I guess once I have MP working as I want then I will experiemnt with that, but at this stage there are always new and cool features to implement before I get to that.
Next step is voice control
- Thread starter
- #7
I have experimented with HIP, but I had poblems configuring HIP to make MP return to the start screen when pressing the PC power button :?
So for now I'm using the standard setup in MP, and have programmed the MCE2005 remote to turn off my TV. Best of all: You can find only one rc in my livingroom
But there are downsides regarding the MCE2005 remote too :?
The buttons on the remote are less responsive than the MCE2004 buttons... You have to press much harder on the vol and ch buttons to make it respond.
Do you know if there are some place to get the MCE2005 remote without the M$ logo?
So for now I'm using the standard setup in MP, and have programmed the MCE2005 remote to turn off my TV. Best of all: You can find only one rc in my livingroom
But there are downsides regarding the MCE2005 remote too :?
The buttons on the remote are less responsive than the MCE2004 buttons... You have to press much harder on the vol and ch buttons to make it respond.
Do you know if there are some place to get the MCE2005 remote without the M$ logo?
Users who are viewing this thread
Similar threads
Ran into this problem following an otherwise sucessful upgrade from MP 1.34 x64 to MP 1.35 x64 the CEC Remote plugin which I use just to control volume and standby, will no longer put my devices (TV & AVR) to sleep when the HTPC is put in standby. Also when I wake up the HTPC MP closes or crashes (not sure which) as per the example in...
Ran into this problem following an otherwise sucessful upgrade from MP 1.34 x64 to MP 1.35 x64 the CEC Remote plugin which I use...
Ran into this problem following an otherwise sucessful upgrade from MP 1.34 x64 to MP 1.35 x64 the CEC Remote plugin which I use...
Many thanks for the answer.
So far I've used Logitech's Harmony hub. This allows you to control all components (including the media portal). I have now contacted the Sofabaton hotline. It should also work here like with the Harmony. Unfortunately, not all of the IR codes are correct. You can also learn commands here. But that doesn't...
Many thanks for the answer.
So far I've used Logitech's Harmony hub. This allows you to control all components (including the...
I don't have a complicated A/V system - a Sony A8H TV, Yamaha receiver, and a HTPC on which I run most media through MediaPortal. I...
Ok, so perhaps a solution, but not the "right" solution. On the client, within media portal configuration, under TV settings, advanced options, I switched to UNC paths instead of the default RSS, and it's working very well. Sure I had to figure out the paths, but no big deal.
Maybe helpful for someone in the future. Thanks for the...
Ok, so perhaps a solution, but not the "right" solution. On the client, within media portal configuration, under TV settings...
Hi folks. I have an issue with a new install/integration into my mediaportal system. I have a “mediaportal server” which has the TV...
You can always try, select any window, turn off the Media Portal, change the ID of the selected one to the desired one (plugin) and check.
You can always try, select any window, turn off the Media Portal, change the ID of the selected one to the desired one (plugin) and...
I don't have a TV card in my HTPC setup, so I really only use plugins that browse and show media files, like MP TV-Series, Moving...
Maybe they only show the bits information for the x64 version and no bits information for the 32-bit version?
Maybe they only show the bits information for the x64 version and no bits information for the 32-bit version?
We have just released MediaPortal 1.34 - Dune x86 and x64 version.
Highlights of this release
Bugfixes:
[MP1-5201] - Fix MPC-HC...
