Reply to thread

Message

<blockquote data-quote="jck99nz" data-source="post: 243614" data-attributes="member: 69396">I'll have to wait until the weekend before I can give more detail on my setup. I used the RF (TV antenna) cable from the cable box into my TV Card. Looking at a picture of the HVR-900, it looks like you'll use the same type of connection . This is an analogue connection, so you'll want to select the analogue capture card. (The HVR-900 also receives digital transmissions, which is probably why MediaPortal also finds a digital card, but StarHub doesn't use this).Try plugging in the cable box to the USB, then use MediaPortal Configuration to add a channel. Add a new channel, call it 'StarHub', and choose 'analogue'. I think there's box which lets you type in the frequency - I can't remember whether you have to do it in Mhz (if so, try 839.25), in Khz (try 839,250) or in Hz (try 839,250,000). You might also have to set 'TV Standard' - in Singapore, it's PAL B.Try playing around with those ideas, and let me know if it works. I can get back with more detail at the weekend.</blockquote>

[QUOTE="jck99nz, post: 243614, member: 69396"] I'll have to wait until the weekend before I can give more detail on my setup. I used the RF (TV antenna) cable from the cable box into my TV Card. Looking at a picture of the HVR-900, it looks like you'll use the same type of connection . This is an analogue connection, so you'll want to select the analogue capture card. (The HVR-900 also receives digital transmissions, which is probably why MediaPortal also finds a digital card, but StarHub doesn't use this). Try plugging in the cable box to the USB, then use MediaPortal Configuration to add a channel. Add a new channel, call it 'StarHub', and choose 'analogue'. I think there's box which lets you type in the frequency - I can't remember whether you have to do it in Mhz (if so, try 839.25), in Khz (try 839,250) or in Hz (try 839,250,000). You might also have to set 'TV Standard' - in Singapore, it's PAL B. Try playing around with those ideas, and let me know if it works. I can get back with more detail at the weekend. [/QUOTE]

Verification