Reply to thread

Message

<blockquote data-quote="Syrel" data-source="post: 1057000" data-attributes="member: 145506">Hi,I'm struggling to setup some RTSP streaming TV channels. With the original filter that came with MP1.6 I got crash right after the 1st channel scan. With this new filter the scan completes, however no channels are found. I've read through this thread, and followed all guides to debug what's going on. This is what I did so far:<ol>
<li data-xf-list-type="ol">Set up router to open/forward all UDP ports to the client (for simplicity sake)</li>
<li data-xf-list-type="ol">Disabled Windows firewall</li>
<li data-xf-list-type="ol">Verified that the stream is indeed working, using VLC and MPC-HC. 
</li>
<li data-xf-list-type="ol">Used Wireshark to check what's going on. RTSP OPTION and DESCRIBE are working fine, but after that, no data are coming in.</li>
<li data-xf-list-type="ol">Checked the relevant MP logs, and found that apparently the stream opens, but the data format is not accepted by the filter.</li>
<li data-xf-list-type="ol">I check this thread once more, and finally found the following note right in #1:</li>
</ol>

Now I checked the stream format in MPC-HC, and apparently it is H.264 MPEG4. Now can someone pls. confirm, that indeed currently I will not be able to play this stream, because filter accepts MPEG2-coded streams only? Or is there something I might have overlooked? (I can upload all logs later on, I just did not want to attach them if my assumption above is correct.) Thanks in advance!</blockquote>

[QUOTE="Syrel, post: 1057000, member: 145506"] Hi, I'm struggling to setup some RTSP streaming TV channels. With the original filter that came with MP1.6 I got crash right after the 1st channel scan. With this new filter the scan completes, however no channels are found. I've read through this thread, and followed all guides to debug what's going on. This is what I did so far: [LIST=1] [*]Set up router to open/forward all UDP ports to the client (for simplicity sake) [*]Disabled Windows firewall [*]Verified that the stream is indeed working, using VLC and MPC-HC. [*]Used Wireshark to check what's going on. RTSP OPTION and DESCRIBE are working fine, but after that, no data are coming in. [*]Checked the relevant MP logs, and found that apparently the stream opens, but the data format is not accepted by the filter. [*]I check this thread once more, and finally found the following note right in #1: [/LIST] [INDENT] [/INDENT] Now I checked the [B]stream format[/B] in MPC-HC, and apparently it[B] is H.264 MPEG4[/B]. Now can someone pls. confirm, that indeed currently I will not be able to play this stream, because filter accepts MPEG2-coded streams only? Or is there something I might have overlooked? (I can upload all logs later on, I just did not want to attach them if my assumption above is correct.) Thanks in advance! [/QUOTE]

Verification