- September 3, 2006
- 13
- 0
MediaPortal Version: 0.2.2.0
Windows Version: Windows XP SP2 32bit
CPU Type: AMD Athlon64 4000+ (San Diego)
HDD: 2 x 200,0 GB – SATAII-300 - WD Caviar SE - Raid 0
Memory: 4x512 MB PC3500 DDR433 (2xDualChannel) - Kingston KHX3500AK2/1G (HyperX)
Motherboard: Asus A8N-E
Motherboard Chipset: nVidia nForce4 Ultra
Motherboard Bios: Phoenix - Award v6.00PG
Video Card: Asus EN6800GT nVidia GeForce 6800GT
Video Card Driver: ASUS Enhanced Display 122, nVidia 81.89
Sound Card: OnBoard Realtek ALC850, 8 Channel Surround
Sound Card Driver: Realtek 5.10.0000.5750
1. TV Card: Hauppauge WinTV-PVR500MCE (Dual Tuner)
1. TV Card Type: Analog
1. TV Card Driver: Hauppauge WinTV-PVR 2.0.43.24054
MPEG2 Video Codec: MPV Decoder Filter
MPEG2 Audio Codec: MPA Decoder Filter
Satelite/CableTV Provider: TDC OnCable
HTPC Case: ThermalTake VA3000, Aluminium, Black
Cooling: 120mm Fan
Power Supply: NorthQ NQ4001EX Super Silent PSU 400Watt
Remote: MCE Remote
TV: Saba 28"
TV - HTPC Connection: S-VHS + Stereo Phono
Monitor is running in 1600 x 1200
My Tv is running in 1024 x 768 using a S-VHS connecting
I set my NVidia driver to use dual screen (monitor as primary) and have the TV to show
the upper left corner of my monitor. I disabled the scroll of display when mouse hits
border.
I set the Options = > Screen calibration = > GUI calibration to [0,0] - 1027,768, so MP is displayes in the upper left corner.
Under Options = > Screen calibration = > Screen calibration i set:
Upper left = 0,0
Lower right = 128,128
The lower right value caps at 128 but this isnt enough to get it right on the TV.
Upper left i would like to give a negative value as i would like to crop something of the picture as its is show on a old fashion TV.
Can i but any means change these value or do i have to go back switching the resolution forth and back when using the PC or TV, without compromising the resolution?
Windows Version: Windows XP SP2 32bit
CPU Type: AMD Athlon64 4000+ (San Diego)
HDD: 2 x 200,0 GB – SATAII-300 - WD Caviar SE - Raid 0
Memory: 4x512 MB PC3500 DDR433 (2xDualChannel) - Kingston KHX3500AK2/1G (HyperX)
Motherboard: Asus A8N-E
Motherboard Chipset: nVidia nForce4 Ultra
Motherboard Bios: Phoenix - Award v6.00PG
Video Card: Asus EN6800GT nVidia GeForce 6800GT
Video Card Driver: ASUS Enhanced Display 122, nVidia 81.89
Sound Card: OnBoard Realtek ALC850, 8 Channel Surround
Sound Card Driver: Realtek 5.10.0000.5750
1. TV Card: Hauppauge WinTV-PVR500MCE (Dual Tuner)
1. TV Card Type: Analog
1. TV Card Driver: Hauppauge WinTV-PVR 2.0.43.24054
MPEG2 Video Codec: MPV Decoder Filter
MPEG2 Audio Codec: MPA Decoder Filter
Satelite/CableTV Provider: TDC OnCable
HTPC Case: ThermalTake VA3000, Aluminium, Black
Cooling: 120mm Fan
Power Supply: NorthQ NQ4001EX Super Silent PSU 400Watt
Remote: MCE Remote
TV: Saba 28"
TV - HTPC Connection: S-VHS + Stereo Phono
Monitor is running in 1600 x 1200
My Tv is running in 1024 x 768 using a S-VHS connecting
I set my NVidia driver to use dual screen (monitor as primary) and have the TV to show
the upper left corner of my monitor. I disabled the scroll of display when mouse hits
border.
I set the Options = > Screen calibration = > GUI calibration to [0,0] - 1027,768, so MP is displayes in the upper left corner.
Under Options = > Screen calibration = > Screen calibration i set:
Upper left = 0,0
Lower right = 128,128
The lower right value caps at 128 but this isnt enough to get it right on the TV.
Upper left i would like to give a negative value as i would like to crop something of the picture as its is show on a old fashion TV.
Can i but any means change these value or do i have to go back switching the resolution forth and back when using the PC or TV, without compromising the resolution?