Germany
TV-Server Version: tvengine3 Rev15317
MediaPortal Version: 0.2.3 RC1 Rev15317
MediaPortal Skin: BlueTwo wide
Windows Version: Windows 2003 R2 SP2
CPU Type: Intel Core2 Duo T5600 1830 MHz
HDD: Samsung HD401LJ 400GB
Memory: 2x512 MB DDR2 667MHz
Motherboard: AOpen i945GTm-VHL
Motherboard Chipset: Intel 945GT / Intel ICH7MDH
Motherboard Bios: R1.05
Video Card: NVIDIA GeForce 6600 LE passive
Video Card Driver: Forceware 93.71
Sound Card: Realtek ALC882D HD Audio (onBoard)
Sound Card AC3: coaxial out / optical out
Sound Card Driver: R1.54
1. TV Card: FireDTV BDA DVB-C (Floppy DTV)
1. TV Card Type: DVB-C
1. TV Card Driver: 02/04/2007, 4.8.0 BDA Driver
MPEG2 Video Codec: ffdshow
MPEG2 Audio Codec: ffdshow
Satelite/CableTV Provider: unitiy digital TV
HTPC Case: Silverstone LC11m silver
Cooling: 120mm Papst 4412F/2GLL / passive
Power Supply: mCubed EF16 160W external passive cooled
Remote: Logitech MX Air
TV: Panasonic TX-26LX50F
TV - HTPC Connection: S-Video
Hey guys,
I have noticed that if "Show special mouse controls (scrollbar, etc)" is selected in the General configuration the mouse-over OSD events seem to not work properly. Here is what I tried:
Using standard screen calibration...
the OSD shows up correctly:
By using an alternative screen calibration like...
the OSD does not show up correctly anymore:
Even if I use the standard screen calibration...
along with just moving an OSD offset in the Screen calibration...
the OSD still does not react by hovering its correct position:
The bottom line is:
The OSD is always shown when moving to the absolute bottom of the screen no matter what the actual position of the OSD is. I think the OSD should be shown by hovering the position that is configured in the setup.
-level20peon
EDIT: I attached a video to clarify what I mean. Note the flickering of the OSD when the cursor moves close to the bottom of the screen !
MediaPortal Version: 0.2.3 RC1 Rev15317
MediaPortal Skin: BlueTwo wide
Windows Version: Windows 2003 R2 SP2
CPU Type: Intel Core2 Duo T5600 1830 MHz
HDD: Samsung HD401LJ 400GB
Memory: 2x512 MB DDR2 667MHz
Motherboard: AOpen i945GTm-VHL
Motherboard Chipset: Intel 945GT / Intel ICH7MDH
Motherboard Bios: R1.05
Video Card: NVIDIA GeForce 6600 LE passive
Video Card Driver: Forceware 93.71
Sound Card: Realtek ALC882D HD Audio (onBoard)
Sound Card AC3: coaxial out / optical out
Sound Card Driver: R1.54
1. TV Card: FireDTV BDA DVB-C (Floppy DTV)
1. TV Card Type: DVB-C
1. TV Card Driver: 02/04/2007, 4.8.0 BDA Driver
MPEG2 Video Codec: ffdshow
MPEG2 Audio Codec: ffdshow
Satelite/CableTV Provider: unitiy digital TV
HTPC Case: Silverstone LC11m silver
Cooling: 120mm Papst 4412F/2GLL / passive
Power Supply: mCubed EF16 160W external passive cooled
Remote: Logitech MX Air
TV: Panasonic TX-26LX50F
TV - HTPC Connection: S-Video
Hey guys,
I have noticed that if "Show special mouse controls (scrollbar, etc)" is selected in the General configuration the mouse-over OSD events seem to not work properly. Here is what I tried:
Using standard screen calibration...
the OSD shows up correctly:
By using an alternative screen calibration like...
the OSD does not show up correctly anymore:
Even if I use the standard screen calibration...
along with just moving an OSD offset in the Screen calibration...
the OSD still does not react by hovering its correct position:
The bottom line is:
The OSD is always shown when moving to the absolute bottom of the screen no matter what the actual position of the OSD is. I think the OSD should be shown by hovering the position that is configured in the setup.
-level20peon
EDIT: I attached a video to clarify what I mean. Note the flickering of the OSD when the cursor moves close to the bottom of the screen !
