Mp configuration exits with no log entries and an inconveniance error (1 Viewer)

[idioteque]

MediaPortal Version: 0.2.1.0
MediaPortal Skin: Blue Two/MePo
Windows Version: XP SP2
CPU Type: AMD Athlon 64 3200+
HDD: Samsung SpinPoint HD300LD (7200rpm, ATA133, 8MB) (300GB)
Memory: 1536 Mb DDR
Motherboard: K8T Neo-FIS2R
Motherboard Chipset: Via K800T
Motherboard Bios: AMI 2.2
Video Card: Gigabyte FX5200
Video Card Driver: 84.13
Sound Card: sb Live 1024 OEM
Sound Card AC3: No AC3
Sound Card Driver:
1. TV Card: -
1. TV Card Type: No tv
1. TV Card Driver: -
2. TV Card: -
2. TV Card Type: -
2. TV Card Driver: -
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Cyberlink
MPEG2 Audio Codec: AC3
Satelite/CableTV Provider: -
HTPC Case: Silverstone LC03
Cooling:
Power Supply: Aopen 300 Watt
Remote: MCE 2005
TV: Sony 63 cm PiP
TV - HTPC Connection: S-Video

Since I think the last Windows Update Configuration.exe will not start. Even if I use a clean 0.2.10 setup, mp.config.exe will exit returning a screen. No log, of any kind are produced. I am not sure however if it's the Windows Update or not.

The thing is that on a clean MediaPortal with no settings XML file, the wizard starts up and a settings XML is created.

If I run MP config.exe again using the same settings .XML MP config.exe crashes.

Any version crashes, SVN or 0.2.10 even the ones that worked a few days ago

There are not logs entries in the mp\log folder and no errors in the windows logs

How can I find out what is making MP.config crash ?

 

[ronilse]

Hi,
Not seen this here @ all (not on any of the 4 comps, all updated to latest @ win update), you did test the old releases into a clean folder?

Regards
Roy

 

[idioteque]

tested 0.2.10 clean, and several SVN they all don't work

What comes after these log entries in a normal MP.config .exe ?

2006-12-22 19:51:26.328125 [Info.][Config Main]: add USBUIRT section
2006-12-22 19:51:26.343750 [Info.][Config Main]: USBUIRT:Open
2006-12-22 19:51:26.343750 [Info.][Config Main]: USBUIRT:uuirtdrv.dll not found
2006-12-22 19:51:26.343750 [Info.][Config Main]: add SerialUIR section
2006-12-22 19:51:26.375000 [Info.][Config Main]: add WINLIRC section
2006-12-22 19:51:26.375000 [Info.][Config Main]: add RedEye section
2006-12-22 19:51:26.390625 [Info.][Config Main]: add DirectInput section
HERE MP CRASHES SO WHAT ENTRY IS NORMALLY HERE ?????????????

 

[ronilse]

Hi,
This it's what i have after:


2006-12-23 12:22:39.330731 [Info.][Config Main]: MAP: using default mappings for DirectInput
2006-12-23 12:22:44.928780 [Info.][Config Main]: add weather section
2006-12-23 12:22:44.958824 [Info.][Config Main]: add plugins section
2006-12-23 12:22:45.279284 [Info.][Config Main]: bring to front
2006-12-23 12:22:45.279284 [Info.][Config Main]: settingsform constructor done
2006-12-23 12:22:45.279284 [Info.][Config Main]: start application
++++

Regards
Roy

 

[idioteque]

mm does not appear to be anything significant.

The question then is why does MP config.exe

 

[ronilse]

Hi,
So the first time wizard & MediaPortal runs fine after a clean install + svn.it's just the configuration/MP Setup that doesn't or?
You could attach your MediaPortal.log to the post maybe it's possible to see something from that.

Regards
Roy

 

[idioteque]

Media portal itself runs fine.

1) clean 0.2.10 setup, run configuration.exe and the wizard starts. run all to the and and exits.
2) MP runs fine but only the basic stuff is setup
3) re-run configuration.exe again ( second time) Configuration.exe crashes
4) delete the mediaportal.xml and the wizard starts again, see 2:


But because Mediaportal runs fine, nothing shows up in the MP.log

weird stuff.

I'll post all the other logs in in a few hours ( at work now )

 

[idioteque]

MediaPortal Version: 0.2.1.0
MediaPortal Skin:
Windows Version: XP SP2
CPU Type: AMD Athlon 64 3200+
HDD: Samsung SpinPoint HD300LD (7200rpm, ATA133, 8MB) (300GB)
Memory: 1536 Mb DDR
Motherboard: K8T Neo-FIS2R
Motherboard Chipset: Via K800T
Motherboard Bios: AMI 2.2
Video Card: Gigabyte FX5200
Video Card Driver: 84.13
Sound Card: sb Live 1024 OEM
Sound Card AC3: No AC3
Sound Card Driver:
1. TV Card: -
1. TV Card Type: No tv
1. TV Card Driver: -
2. TV Card: -
2. TV Card Type: -
2. TV Card Driver: -
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Cyberlink
MPEG2 Audio Codec: AC3
Satelite/CableTV Provider: -
HTPC Case: Silverstone LC03
Cooling:
Power Supply: Aopen 300 Watt
Remote: MCE 2005
TV: Sony 63 cm PiP
TV - HTPC Connection: S-Video

TEST RUN

Clean 0.2.10

1) config.exe > writes xml all OK
2) start MP > all OK
3) config.exe > NOT OK config.exe crashes

logs of these steps are included

 

[idioteque]

MediaPortal Version: 0.2.1.0
MediaPortal Skin:
Windows Version: XP SP2
CPU Type: AMD Athlon 64 3200+
HDD: Samsung SpinPoint HD300LD (7200rpm, ATA133, 8MB) (300GB)
Memory: 1536 Mb DDR
Motherboard: K8T Neo-FIS2R
Motherboard Chipset: Via K800T
Motherboard Bios: AMI 2.2
Video Card: Gigabyte FX5200
Video Card Driver: 84.13
Sound Card: sb Live 1024 OEM
Sound Card AC3: No AC3
Sound Card Driver:
1. TV Card: -
1. TV Card Type: No tv
1. TV Card Driver: -
2. TV Card: -
2. TV Card Type: -
2. TV Card Driver: -
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Cyberlink
MPEG2 Audio Codec: AC3
Satelite/CableTV Provider: -
HTPC Case: Silverstone LC03
Cooling:
Power Supply: Aopen 300 Watt
Remote: MCE 2005
TV: Sony 63 cm PiP
TV - HTPC Connection: S-Video

 

[idioteque]

Mp configuration exits with no log entries and an inconveniance error
MediaPortal Version: 0.2.2.0
MediaPortal Skin: Blue Two/MePo
Windows Version: XP SP2
CPU Type: AMD Athlon 64 3200+
HDD: Samsung SpinPoint HD300LD (7200rpm, ATA133, 8MB) (300GB)
Memory: 1536 Mb DDR
Motherboard: K8T Neo-FIS2R
Motherboard Chipset: Via K800T
Motherboard Bios: AMI 2.2
Video Card: Gigabyte FX5200
Video Card Driver: 84.13
Sound Card: sb Live 1024 OEM
Sound Card AC3: No AC3
Sound Card Driver:
1. TV Card: -
1. TV Card Type: No tv
1. TV Card Driver: -
2. TV Card: -
2. TV Card Type: -
2. TV Card Driver: -
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Cyberlink
MPEG2 Audio Codec: AC3
Satelite/CableTV Provider: -
HTPC Case: Silverstone LC03
Cooling:
Power Supply: Aopen 300 Watt
Remote: MCE 2005
TV: Sony 63 cm PiP
TV - HTPC Connection: S-Video

Since I think the last Windows Update Configuration.exe will not start.

(update: the second computer also runs MP ans there everything runs OK so its not a Windows Update issue)

Even if I use a clean 0.2.2.0 setup, mp.config.exe will exit returning a screen. No log, of any kind are produced. I am not sure however if it's the Windows Update or not.

The thing is that on a clean MediaPortal with no settings XML file, the wizard starts up and a settings XML is created.

If I run MP config.exe again using the same settings .XML MP config.exe crashes.

Any version crashes, SVN or 0.2.10 even the ones that worked a few days ago

There are not logs entries in the mp\log folder and no errors in the windows logs

How can I find out what is making MP.config crash ?

link to previous tread

https://forum.team-mediaportal.com/showthread.php?t=14001

I retested with 0.2.2.0 and the error is still there

Media portal itself runs fine.

1) clean 0.2.20 setup, run configuration.exe and the wizard starts. run all to the and and exits.
2) MP runs fine but only the basic stuff is setup
3) re-run configuration.exe again ( second time) Configuration.exe crashes
4) delete the mediaportal.xml and the wizard starts again, see 2:


But because Mediaportal runs fine, nothing shows up in the MP.log