TV-Server Version: 1.0 RC4
MediaPortal Version: 1.0 RC4
MediaPortal Skin: Blue3Wide
Windows Version: Windows Vista Ultimate 32bit with SP1
CPU Type: AMD Athlon X2 BE-2350 (AM2)
HDD: 2x Samsung 750GB (Raid 1)+ HAMA SSD 4GB (timeshifting)
Memory: 2GB DDR2
Motherboard: Gigabyte GA-MA78G-DS3H
Video Card: Club 3D CGAX-H4652DD Passiv (replaces OnBoard ATI Radeon HD3200)
Video Card Driver: Catalyst V8.12 (solved GUI flickering for me)
Sound Card: ATI HD audio of graphics card
Sound Card AC3: all sound formats go through the graphics card via HDMI to my AV receiver
Sound Card Driver: Realtek HD audio codec driver R2.13
1. TV Card: Technotrend S2-3200
1. TV Card Type: DVB-S and DVB-S2
1. TV Card Driver: 5.0.0.19
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Cyberlink PowerDVD 7.3 Ultimate codecs
MPEG2 Audio Codec: ffdshow audio codec
h.264 Video Codec: Cyberlink PowerDVD 7.3 Ultimate codec
Satelite/CableTV Provider: Astra 19.2 E
HTPC Case: Ahanix MCE 601
Cooling: power supply fan, CPU boxed cooler, 2 housing fans (all controlled by SpeedFan)
Power Supply: Ahanix
Remote: Logitech Harmony 555
TV: Samsung LCD 32"
TV - HTPC Connection: HDMI --> Denon AVR-1909 --> HDMI --> Samsung LCD TV
Hi,
I recently bought a new AV-receiver and therefore have changed everything to HDMI.
In PowerDVD, I have set the speaker environment to "HDMI" and the output mode to "PCM" (see attached picture).
The problem is that in MP Config --> Direct Show Filter Control --> PowerDVD 7 Decoder Settings --> Speaker environment can only be set to "SPDIF" or "7 speaker" (see attached picture).
If I set "PowerDVD audio decoder" as audio codec in MP configuration and "prefer AC3" in the TV client, I do not have audio for dolby digital TV channels.
If I am using the MPA codec, that also only supports SPDIF as audio option, it works okay...
So my question is, can the HDMI option be added to the PowerDVD audio configuration section in MP config?

Logs can be provided if necessary...
MediaPortal Version: 1.0 RC4
MediaPortal Skin: Blue3Wide
Windows Version: Windows Vista Ultimate 32bit with SP1
CPU Type: AMD Athlon X2 BE-2350 (AM2)
HDD: 2x Samsung 750GB (Raid 1)+ HAMA SSD 4GB (timeshifting)
Memory: 2GB DDR2
Motherboard: Gigabyte GA-MA78G-DS3H
Video Card: Club 3D CGAX-H4652DD Passiv (replaces OnBoard ATI Radeon HD3200)
Video Card Driver: Catalyst V8.12 (solved GUI flickering for me)
Sound Card: ATI HD audio of graphics card
Sound Card AC3: all sound formats go through the graphics card via HDMI to my AV receiver
Sound Card Driver: Realtek HD audio codec driver R2.13
1. TV Card: Technotrend S2-3200
1. TV Card Type: DVB-S and DVB-S2
1. TV Card Driver: 5.0.0.19
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Cyberlink PowerDVD 7.3 Ultimate codecs
MPEG2 Audio Codec: ffdshow audio codec
h.264 Video Codec: Cyberlink PowerDVD 7.3 Ultimate codec
Satelite/CableTV Provider: Astra 19.2 E
HTPC Case: Ahanix MCE 601
Cooling: power supply fan, CPU boxed cooler, 2 housing fans (all controlled by SpeedFan)
Power Supply: Ahanix
Remote: Logitech Harmony 555
TV: Samsung LCD 32"
TV - HTPC Connection: HDMI --> Denon AVR-1909 --> HDMI --> Samsung LCD TV
Hi,
I recently bought a new AV-receiver and therefore have changed everything to HDMI.
In PowerDVD, I have set the speaker environment to "HDMI" and the output mode to "PCM" (see attached picture).
The problem is that in MP Config --> Direct Show Filter Control --> PowerDVD 7 Decoder Settings --> Speaker environment can only be set to "SPDIF" or "7 speaker" (see attached picture).
If I set "PowerDVD audio decoder" as audio codec in MP configuration and "prefer AC3" in the TV client, I do not have audio for dolby digital TV channels.
If I am using the MPA codec, that also only supports SPDIF as audio option, it works okay...
So my question is, can the HDMI option be added to the PowerDVD audio configuration section in MP config?
Logs can be provided if necessary...