New Option: turn monitor/tv on when resuming (1 Viewer)
- Thread starter wewe
- Start date
Germany
Some motherboard bioses have option to wake VGA adapter when resuming from standby. It's called "repost video after wakeup" or something similar. Not all bioses have this option and using the MP option is sending an event to Windows that the display adapter should be waken up.
If it's not working, you could try to disable "Force shutdown" under Power Scheduler's config. At least my system goes to standby without sending an event to MP when using that force option. And if MP doesn't get event from the sytem that it's going to the standby mode then it's not trying to wake up the monitor / display adapter.
If it's not working, you could try to disable "Force shutdown" under Power Scheduler's config. At least my system goes to standby without sending an event to MP when using that force option. And if MP doesn't get event from the sytem that it's going to the standby mode then it's not trying to wake up the monitor / display adapter.
Turn monitor/tv on when resuming from standby?
TV-Server Version: 1.0.0.0 RC2
MediaPortal Version: 1.0.0.0 RC2
MediaPortal Skin: Blue Two Wide
Windows Version: Vista Home Premium SP1
CPU Type: AMD Athlon LE-1600 2.20GHz
HDD: Western Digital 500GB SATA (WD5000AAKS)
Memory: 2GB DDR2 800 (2x1GB)
Motherboard: Gigabyte GA-MA78GM-S2H rev1.0 F5
Video Card: Integrated ATI HD-3200
Video Card Driver: 8.7 (8.512)
Sound Card: Integrated Realtek HD
Sound Card AC3: HDMI & SPDIF
Sound Card Driver: 1.84
1. TV Card: Leadtek Winfast DTV1000S
1. TV Card Type: DVB-T
1. TV Card Driver: 1.3.4.5
2. TV Card: Leadtek Winfast DTV1000S
2. TV Card Type: DVB-T
2. TV Card Driver: 1.3.4.5
MPEG2 Video Codec: Microsoft MPEG-2 Video Decoder
MPEG2 Audio Codec: MPA Decoder Filter
h.264 Video Codec: CoreAVC 1.7
HTPC Case: Antec NSK2480B
Remote: MS 1039 RC6, eHome Driver, IR Server Suite 1.0.4.1
TV: Panasonic TH50PX70a
TV - HTPC Connection: HDMI
Hi All. Is anyone able to explain (preferably in some detail) the option in MP Config, under General, that says "Turn monitor/tv on when resuming from standby". I've read the description in the manual on the wiki, but that doesn't help me.
How does this work with different video connection types? eg. HDMI (which is what I'm specifically after), DVI, PC/D-SUB? What about things like Yellow RCA (Composite), SVIDEO or Component.
In tourettes post the comment is 'VGA Adapter'. Can anyone specifically explain this is more detail.
Is this option even working at all anymore? I haven't actually seen any evidence that it is.
I'm trying to work out if EDID information is sent with this option.
peter448
TV-Server Version: 1.0.0.0 RC2
MediaPortal Version: 1.0.0.0 RC2
MediaPortal Skin: Blue Two Wide
Windows Version: Vista Home Premium SP1
CPU Type: AMD Athlon LE-1600 2.20GHz
HDD: Western Digital 500GB SATA (WD5000AAKS)
Memory: 2GB DDR2 800 (2x1GB)
Motherboard: Gigabyte GA-MA78GM-S2H rev1.0 F5
Video Card: Integrated ATI HD-3200
Video Card Driver: 8.7 (8.512)
Sound Card: Integrated Realtek HD
Sound Card AC3: HDMI & SPDIF
Sound Card Driver: 1.84
1. TV Card: Leadtek Winfast DTV1000S
1. TV Card Type: DVB-T
1. TV Card Driver: 1.3.4.5
2. TV Card: Leadtek Winfast DTV1000S
2. TV Card Type: DVB-T
2. TV Card Driver: 1.3.4.5
MPEG2 Video Codec: Microsoft MPEG-2 Video Decoder
MPEG2 Audio Codec: MPA Decoder Filter
h.264 Video Codec: CoreAVC 1.7
HTPC Case: Antec NSK2480B
Remote: MS 1039 RC6, eHome Driver, IR Server Suite 1.0.4.1
TV: Panasonic TH50PX70a
TV - HTPC Connection: HDMI
Hi All. Is anyone able to explain (preferably in some detail) the option in MP Config, under General, that says "Turn monitor/tv on when resuming from standby". I've read the description in the manual on the wiki, but that doesn't help me.
How does this work with different video connection types? eg. HDMI (which is what I'm specifically after), DVI, PC/D-SUB? What about things like Yellow RCA (Composite), SVIDEO or Component.
In tourettes post the comment is 'VGA Adapter'. Can anyone specifically explain this is more detail.
Is this option even working at all anymore? I haven't actually seen any evidence that it is.
I'm trying to work out if EDID information is sent with this option.
peter448
Users who are viewing this thread
Similar threads
Yes, thanks. I did not set this on purpose. Strange
Yes, thanks. I did not set this on purpose. Strange
When the TV is running and I switch off the monitor the TV playback stopps only a few seconds later.
I can see this via a VNC...
How do you add a new selection to the TV Guide Rows option in the BasicHome Editor in DWHD? Id like to add an option for 8 Rows. Which xmls should I be looking at to change.?
Thanks!
How do you add a new selection to the TV Guide Rows option in the BasicHome Editor in DWHD? Id like to add an option for 8 Rows...
How do you add a new selection to the TV Guide Rows option in the BasicHome Editor in DWHD? Id like to add an option for 8 Rows...
maybe setting loglevel to debug might pinpoint the difference between normal and stuck?
Preferable with as much disabled as possible
also try to see if anything is happening during stuck for the mediaportal process(resource monitor, disk activity, cpu usage, anything)
maybe other programs competing for resouces?
maybe setting loglevel to debug might pinpoint the difference between normal and stuck?
Preferable with as much disabled as...
Since over a year my MP sometimes stucks while showing the welcome screen. It started once a week now it happens every second time...
Thanks very much, Jasmeet. Worked. But note that this setting has moved, apparently, to: Settings > TV (not Plugins)
Thanks very much, Jasmeet. Worked. But note that this setting has moved, apparently, to: Settings > TV (not Plugins)
I recently did a fresh install of 2.5 on a new Windows 11 PC. My previous (Windows 10) version of 2.5 gave my broadcast TV channel...
To other people reading about this 'issue', Doskabouter provided me with a fix/patch. It is a modified version of tswriter.ax which solved the problem with dolby digital plus audio.
I want to thank Doskabouter for all his time and energy he put into resolving this!!
To other people reading about this 'issue', Doskabouter provided me with a fix/patch. It is a modified version of tswriter.ax which...
Hi all,
I could use some help with the following;
OS: Win11 24H2
TV server: 1.37.000.0|x64
(working with Mediaportal for maybe 20...