Reply to thread

Message

<blockquote data-quote="MacGyver2k" data-source="post: 825263" data-attributes="member: 15878">you have the choice between single led modules which you have to wire yourselfor the in form as the led flexband with at least 1m in length (32leds per m).flexband: <a href="http://shop.led-studien.de/product_info.php/info/p56_LED-Flexband-digital-1m.html" target="_blank">LED-Studien Online Shop - LED-Flexband digital 1m LK06</a>single pixel: <a href="http://shop.led-studien.de/product_info.php/info/p84_PIX---RGB-Einzelpixel-20x20mm.html" target="_blank">LED-Studien Online Shop - PIX - RGB-Einzelpixel 20x20mm LED433</a>single with cable: <a href="http://shop.led-studien.de/product_info.php/info/p116_RGB-Einzelpixel-mit-Kabel.html" target="_blank">LED-Studien Online Shop - RGB-Einzelpixel mit Kabel LED432</a>these must be new in the shop, prewired in a ladder network.the advantage of the single pixel is that you can define the distance between each pixel yourself by the length of wire you choose.since the sedu controller officially only controls up to 64 channels you could only use 2m of the flexband.in my setup (37&quot; lcd) i need about 2.3m of led flexband length which leads to 74 leds.atmowin supports only 64 channels, but i think there is a patched version floating around in the german thread with support of more channels.still my personal opionion is that 64 channels are sufficientt and more are out of my experience, so i can't tell you how good the software support is for more channels.i just saw your system specs: they say you have a semperon 2800+.might be a little weak for atmolight, since the screen capturing takes some cpu.</blockquote>

[QUOTE="MacGyver2k, post: 825263, member: 15878"] you have the choice between single led modules which you have to wire yourself or the in form as the led flexband with at least 1m in length (32leds per m). flexband: [url=http://shop.led-studien.de/product_info.php/info/p56_LED-Flexband-digital-1m.html]LED-Studien Online Shop - LED-Flexband digital 1m LK06[/url] single pixel: [url=http://shop.led-studien.de/product_info.php/info/p84_PIX---RGB-Einzelpixel-20x20mm.html]LED-Studien Online Shop - PIX - RGB-Einzelpixel 20x20mm LED433[/url] single with cable: [url=http://shop.led-studien.de/product_info.php/info/p116_RGB-Einzelpixel-mit-Kabel.html]LED-Studien Online Shop - RGB-Einzelpixel mit Kabel LED432[/url] these must be new in the shop, prewired in a ladder network. the advantage of the single pixel is that you can define the distance between each pixel yourself by the length of wire you choose. since the sedu controller officially only controls up to 64 channels you could only use 2m of the flexband. in my setup (37" lcd) i need about 2.3m of led flexband length which leads to 74 leds. atmowin supports only 64 channels, but i think there is a patched version floating around in the german thread with support of more channels. still my personal opionion is that 64 channels are sufficientt and more are out of my experience, so i can't tell you how good the software support is for more channels. i just saw your system specs: they say you have a semperon 2800+. might be a little weak for atmolight, since the screen capturing takes some cpu. [/QUOTE]

Verification