No channels in MP! (1 Viewer)

[Nemulate]

MediaPortal Version: 0.2.1.0 + latest svn + latest tv engine
MediaPortal Skin:
Windows Version: XP Pro sp 2
CPU Type: Athlon 64 3200+
HDD: 200GB Seagate SATA
Memory: 1024MB PC3200
Motherboard: N-Force 4 Pro Sli
Motherboard Chipset: N-Force 4 Pro Sli
Motherboard Bios:
Video Card: Radeon X300
Video Card Driver:
Sound Card:
Sound Card AC3: no AC3
Sound Card Driver:
1. TV Card: Hauppauge Nova-T pci
1. TV Card Type: DVB-T
1. TV Card Driver:
MPEG2 Video Codec: Intervideo
MPEG2 Audio Codec: Intervideo
Satelite/CableTV Provider:
HTPC Case: Antec
Cooling:
Power Supply: Antec
Remote: Media Center 2005 remote
TV: Acer 19" WS TFT
TV - HTPC Connection: VGA

Having gone back to engine 2 I thought I'd try engine 3 again. Seemed to install ok and could preview the channels in tv server setup but when tried to view them in MP couldn't turn tv on and tv guide lists lots of 'no channels'!
ps was using Blue Two and latest SVN.

Thanks

 

[Noelix]

Your MediaPortal Version says 0.2.1.0 + latest svn... it should be 0.2.0.0 + latest svn to work properly. Try doing a clean install. After that's done, you have to go into the server configuration and add not only the tv card there but the channels as well. Make sure you have channels assigned to your tv card as well. I've had problems with the tv server+client setup, but I have managed to get channels to show up each time.

 

[Nemulate]

Never thought it mattered as 0.2.1.0 was a feature release? I've been using 3 for quite a while with it before but went back to 2 as had a few issues and now like I say it says no channels in the epg when trying 3 again. No worries though as will try a clean install back to 0.2.0.0, I suppose you can only apply so many svns!

 

[ASiDiE]

I am also seening this... I am using 0.2.0.0 and the latest SVN file. I am pretty sure it was working in 12228 but not in 12235 and 12241. I think I might move back to 12228 and see what I get again.

I do get channels in 12228 but when ever I go into recorded tv... MP totally crashes.

Logs:
http://pastebin.team-mediaportal.com/11557 MP.log
http://pastebin.team-mediaportal.com/11558 exception
http://pastebin.team-mediaportal.com/11559 error

 

[ASiDiE]

MediaPortal Version: 0.2.0.0 with SVN 12247
MediaPortal Skin:
Windows Version: Windows XP Pro SP2
CPU Type: Athlon XP +2800 2.2GHZ (Barton)
HDD: 2 160GB Seatages
Memory: 1 GB DDR Ram
Motherboard: BIOSTAR M7VIG 400
Motherboard Chipset: VIA KM266 Pro / VT8235
Motherboard Bios: Biostar / VIG1224
Video Card: Gigabyte 6200 / GV-N62128DS
Video Card Driver: Nvidia 91.31
Sound Card: C-Media CMI9761A 6-Channel AC'97 CODEC
Sound Card AC3: No AC3
Sound Card Driver: 5.12.1.50
1. TV Card: Hauppauge PVR500
1. TV Card Type: Dual Analog
1. TV Card Driver: 2.0.43.24108
2. TV Card: Skystar 2
2. TV Card Type: DVB-S
2. TV Card Driver: 4.4.0.0
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: MPV
MPEG2 Audio Codec: MPA
Satelite/CableTV Provider: Dishnetwork 110, 119
HTPC Case: Cooler Master ATC-610-GX1 Desktop Case
Cooling:
Power Supply: Silenx iXtrema Pro 300w.
Remote: Radio Shack RS-2117
TV: 21 Inch Sanyo SDTV
TV - HTPC Connection: S-Video

I just tested this out on the very lastest dev build of 12247. MP can't seem to find any channels with the tv engine. I then removed the TV engine and the plugin and added my cards back to the old TV engine. I did a scan and found 10 channels and then stopped it. I then went back into mp and there were channels in the list. Also... when I go into Recorded tv... it does not crash with the logs above.

 

[cedric]

Same for me.

The last SVN (Rev12246) and TVServer (Rev12247) doesn't work for me, but it worked with older TVengine and SVN.

 

[Peter Pan]

Same here.
12218 of TVEngine3 works fine. 12231 not.

In the 12231 the channel scan find all my channels, but in the preview of the
tvserver i got a Messagebox: No Video/Audio. for some channels.

I than remove the tvserver and the tvplugin and installed the 12218.
That version works for me.

Sorry i did not have the logs any more.

 

[ASiDiE]

I just loaded on 12255 and that seems to have fixed the problem with the channels and the crash.

Good work guys!

 

[Nemulate]

Yep works fine here too now!

Thanks

 

[Peter Pan]

Yes, latest SVN works again!