New Zealand
When I restart MP, go to the Guide, and select an Analog channel, it starts with no sound.
If I return to the guide, stop the TV stream display (e.g. Stop button on the remote), then select the channel again, it restarts with sound.
TV-Server Version:
MediaPortal Version: 1.0.0.0 RC4
MediaPortal Skin: Blue3 wide
Windows Version: WinXP Pro SP2
CPU Type: AMD Athlon™ 64/FX/X2
HDD: WD1000GB + WD 500GB
Memory: 2GB
Motherboard: Shuttle SN21G5
Video Card: Gigabyte GV-NX73G128D
Video Card Driver: nVidia Forceware 93.71
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card: Hauppauge WinTV HVR-4000
1. TV Card Type: DVB-S/DVB-T/Radio
1. TV Card Driver:
2. TV Card: Hauppauge WinPVR USB2
2. TV Card Type: Analog
2. TV Card Driver:
MPEG2 Video Codec: MPV Decoder Filter
MPEG2 Audio Codec: MPA Decoder Filter
h.264 Video Codec: CoreAVC 1.8
Satelite/CableTV Provider: SkyTV (NZ)
HTPC Case: Shuttle SN21G5
Cooling: Silent X ICE
Remote: MS MCE
TV: Samsung LA40R81BX (40" LCD)
TV - HTPC Connection: DVI-I to D-sub
The logs are for an example of the sequence described above.
Note that the Analog channels are captured using the USB2 device; the HVR-4000 is used only for DVB-T (and EPG from DVB-S channels).
DVB-T channels have no problem.
This problem has been present since I installed the WinPVR USB2 (i.e. RC1 and RC2 - I didn't install RC3), but I have a colleague using the same model who has no problems...
If I return to the guide, stop the TV stream display (e.g. Stop button on the remote), then select the channel again, it restarts with sound.
TV-Server Version:
MediaPortal Version: 1.0.0.0 RC4
MediaPortal Skin: Blue3 wide
Windows Version: WinXP Pro SP2
CPU Type: AMD Athlon™ 64/FX/X2
HDD: WD1000GB + WD 500GB
Memory: 2GB
Motherboard: Shuttle SN21G5
Video Card: Gigabyte GV-NX73G128D
Video Card Driver: nVidia Forceware 93.71
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card: Hauppauge WinTV HVR-4000
1. TV Card Type: DVB-S/DVB-T/Radio
1. TV Card Driver:
2. TV Card: Hauppauge WinPVR USB2
2. TV Card Type: Analog
2. TV Card Driver:
MPEG2 Video Codec: MPV Decoder Filter
MPEG2 Audio Codec: MPA Decoder Filter
h.264 Video Codec: CoreAVC 1.8
Satelite/CableTV Provider: SkyTV (NZ)
HTPC Case: Shuttle SN21G5
Cooling: Silent X ICE
Remote: MS MCE
TV: Samsung LA40R81BX (40" LCD)
TV - HTPC Connection: DVI-I to D-sub
The logs are for an example of the sequence described above.
Note that the Analog channels are captured using the USB2 device; the HVR-4000 is used only for DVB-T (and EPG from DVB-S channels).
DVB-T channels have no problem.
This problem has been present since I installed the WinPVR USB2 (i.e. RC1 and RC2 - I didn't install RC3), but I have a colleague using the same model who has no problems...
) - same result...