NvTv card and NvTv-Remote (1 Viewer)

otla

Portal Member
February 19, 2005
22
0
:) It looks like its working fine with NvTv card. But is there a plugin for the remote??? :shock:
 
K

krisl

Guest
otla said:
:) It looks like its working fine with NvTv card. But is there a plugin for the remote??? :shock:

Any answers on thisone? I can't get the remote to work...
 

dman_lfc

Retired Team Member
  • Premium Supporter
  • July 28, 2004
    1,772
    30
    UK
    Home Country
    New Zealand New Zealand
    No there is no plugin, see the tips & tricks section for a program called HIP.
    If it's a DirectInput remote then try the DirectInput plugin...

    DMAN
     

    Grendizer

    New Member
    August 20, 2005
    3
    0
    Hi. I have that problem too with nvtv remote. Thers no way to configure buttons. nvidia should update the remote software so we could use it, otherwise is very limited.

    Searching in google i found some solutions. There are 2 brands that are selling the same model of remote, or at least of receiver, because this remotes support ir too, nvremote only supports rf. Ok, go to http://www.marmitek.com/en/software/9523.html or http://www.niveusmedia.com/support/PCremote.htm and download the software you prefer. I dont like marmiteks because software wont uninstall, but is easier to see the button assignments. The software from niveus media lets you configure the mouse pad speed and acceleration and uninstalls correctly. Before installing the new drivers remember to uninstall the nvidia drivers for the remote control.

    Ok, with this software you are able to program some buttons. I get programming button error when trying to asign some of them(a lot of them really). So you cant use all the buttons on the remote , but enough of them to control general commands. Any way its weird, because the buttons that you can not configure work, and they reach the receiver but no action or unprogrammable button. If someone finds a way to use all the buttons please post.

    Btw, after installing niveus software i download the last drivers for the receiver from x10, the hardware manufacter, and installed them. I think that niveus and marmitek come with 2.36 drivers, and this are 3.01. The remote software keeps working but the buttons dont work neither.

    PS:Direct input plugin dont works for me, it doesnt detect directinput device
     

    Grendizer

    New Member
    August 20, 2005
    3
    0
    Uninstall nvidia remote drivers and install niveus. This will install niveus software and x10drivers(i think). Then exit niveus software and use msconfig to remove it from start items. Then with girder you can configure all the buttons in the nvtv remote.

    The problem is to configure mouse clicks in the remote, i havent done it properly yet.

    If theres an easier way to do this please tell.
     

    Erikur200

    Portal Member
    March 14, 2006
    6
    0
    USB Reciever

    I know this post is rather old, so probably i will not get any response to it. But i will try. I am not able to find any drivers for my CM21A USB Reciever on the X10 site, could I use the drivers for CM19A ?
     

    Users who are viewing this thread

    Similar threads

    You can always try, select any window, turn off the Media Portal, change the ID of the selected one to the desired one (plugin) and check.
    You can always try, select any window, turn off the Media Portal, change the ID of the selected one to the desired one (plugin) and...
    I don't have a TV card in my HTPC setup, so I really only use plugins that browse and show media files, like MP TV-Series, Moving...
    Replies
    5
    Views
    1K
    Hi, yes, you are right. The official x64 1.32 is buggy. You can try a new installers from this post if you like.
    Hi, yes, you are right. The official x64 1.32 is buggy. You can try a new installers from this post if you like.
    hi, I'm setting up a new computer and have installed MP 1.3.2 after a few goes and getting all the prereqs installed, I was...
    Replies
    3
    Views
    942
    Once I get back home, I'll try that. Thanks!
    Once I get back home, I'll try that. Thanks!
    My mini computer HTPC was doing a fine job running mediaportal, but the internal fan is starting to get very loud. I'd like to...
    Replies
    11
    Views
    944
    MP2 uses the same TV engine as MP1, so it must work also with MP2, you just need to select TVE3 and not TVE3.5 in the installer. MP2 also supports a 3rd TV engine TVMosaic, but this is configured web-based and I can not tell you, if this works with your hardware.
    MP2 uses the same TV engine as MP1, so it must work also with MP2, you just need to select TVE3 and not TVE3.5 in the installer...
    My computer is running Windows 10 Pro. I have installed MP2. Not sure what version. I have a Hauppauge WinTV 1850 TV card...
    Replies
    5
    Views
    570
    Check this web page for the informations about he plugin. To fix the issue, I recommend to uninstal and install the plugin again (if you need it).
    Check this web page for the informations about he plugin. To fix the issue, I recommend to uninstal and install the plugin again...
    I've just installed MP 1.31 with Streamed skin, IMDB+ plugin, Moving Pictures and MP-TV Series. First time starting up MP to...
    Replies
    5
    Views
    748
    Top Bottom