Ongoing Pixelview PlayTv (1 Viewer)

[evecadu]

Hello all, I need some help setting up my TV card (PlayTV Mpeg2) is there a guide or documentation that might help me step by step, also I would like to control my Cable STB thru it, is there a way?

thanks

 

[Spragleknas]

I don't know your TV-card (or STB) but you should control your STB using IR-blasters that comes with the MS MCE remote

What do you mean (exactly) when you say "setting up" your card?

 

[evecadu]

PlayTv Mpeg2

I meant that I installed the card, start up MP but MP wont recognize my card, has any1 experienced this, I know that MP has classified this card as a Analog Software decoder card, but still I cant get to make it work

 

[joboehl]

evecadu,

Are you using MP only or TVServer? I think MP alone is not supposed to recognize analog cards.

Please post your TVServer logs if you are already using it.

 

[evecadu]

Pixelview

Im using MP alone, so theres no way of using an analog card with it, is Tvserver the same GUI as MP, what are the advantages?

 

[joboehl]

Check here:

http://wiki.team-mediaportal.com/TV-Engine_0.3/overview

Keep in mind that, altough usable, TVE3 is still a work in progress.

 

[gsdac]

Tente isto:

Baixe o driver mais atual no site da Pixelview

É necessario instalar os codecs da Intervideo senão não vai funcionar (uso o WINDVR3)


<capturecard commercialname="Pixelview Play TV MPEG2" capturename="Conexant Capture" devid="ven_109e&amp;dev_036e&amp;subsys_00000000&amp;rev_11">
<capabilities tv="true" radio="true" mpeg2="true" mce="false" sw="true" bda="false"></capabilities>
<tv>
<interface cat="mux" video="" audio="" mpeg2="1"></interface>
<filters>
<filter cat="tvtuner" name="Conexant TvTuner" checkdevice="true"></filter>
<filter cat="tvaudio" name="Conexant TvAudio" checkdevice="true"></filter>
<filter cat="crossbar" name="Conexant Crossbar" checkdevice="true"></filter>
<filter cat="capture" name="Conexant Capture" checkdevice="true"></filter>
<filter cat="audcapture" name="%soundcard%" checkdevice="true"></filter>
<filter cat="videncoder" name="%videoencoder%" checkdevice="false"></filter>
<filter cat="audencoder" name="%audioencoder%" checkdevice="false"></filter>
<filter cat="mux" name="%mpegmux%" checkdevice="false"></filter>
</filters>
<connections>
<connection sourcefilter="tvtuner" sourcepin="0" sinkfilter="crossbar" sinkpin="%tvtuner%"></connection>
<connection sourcefilter="tvtuner" sourcepin="1" sinkfilter="tvaudio" sinkpin="0"></connection>
<connection sourcefilter="tvaudio" sourcepin="0" sinkfilter="crossbar" sinkpin="%audiotuner%"></connection>
<connection sourcefilter="crossbar" sourcepin="0" sinkfilter="capture" sinkpin="0"></connection>
<connection sourcefilter="crossbar" sourcepin="1" sinkfilter="audcapture" sinkpin="%Auxiliar%"></connection> <!-- Altere "Auxiliar" pela entrada do Audio na sua placa de som -->
<connection sourcefilter="capture" sourcepin="0" sinkfilter="videncoder" sinkpin="0"></connection>
<connection sourcefilter="audcapture" sourcepin="0" sinkfilter="audencoder" sinkpin="0"></connection>
<connection sourcefilter="videncoder" sourcepin="0" sinkfilter="mux" sinkpin="0"></connection>
<connection sourcefilter="audencoder" sourcepin="0" sinkfilter="mux" sinkpin="1"></connection>
</connections>
</tv>
</capturecard>

Espero ter ajudado.

Obs.: se alguém souber, traduza esta mensagem para o ingles para ajudar outras pessoas.

Obrigado

GSDAC